1. United States
  2. All 3M Products
  3. Films & Sheeting
  4. Reflective Transfer Films
  5. 3M™ Scotchlite™ Reflective Material 8711, Silver Graphic Ready Transfer Film, 610 mm x 50 m, 1 Roll/Case

3M™ Scotchlite™ Reflective Material 8711, Silver Graphic Ready Transfer Film, 610 mm x 50 m, 1 Roll/Case

  • 3M Product Number 8711
  • 3M ID 7000055746
  • UPC 00051138354060

3M™ Scotchlite™ Reflective Material is designed for enhancing visibility in low light and nighttime conditions

Certified to various global high visibility standards such as ANSI/ISEA 107

Reflective surface is exposed for screen printing and converting

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 1MB)
Overall Width (Metric) 610 mm
Flame Resistant No
Daytime Color Silver
Wash Method Home Wash
Overall Length (Metric) 50 m

Details

Highlights
  • 3M™ Scotchlite™ Reflective Material is designed for enhancing visibility in low light and nighttime conditions
  • Certified to various global high visibility standards such as ANSI/ISEA 107
  • Reflective surface is exposed for screen printing and converting
  • Heat transfer application

3M™ Scotchlite™ Reflective Material 8711 Series is a silver transfer film is composed of wide-angle, exposed retroreflective lenses bonded to a heat activated adhesive.

3M Scotchlite Reflective Graphic Transfers are made by screen printing an adhesive in reverse print onto the back side of a sheet of retroreflective lenses. The printed transfer is then heat laminated directly to fabric. Non-reflective colors can also be combined with the transfer for added design capabilities.

The resulting transfer graphic is composed of wide angle, exposed retroreflective lenses bonded to a heat activated adhesive. When properly applied the resulting transfer graphic is designed to help enhance the visibility of the wearer in nighttime or low-light conditions. The retroreflective surface, when illuminated by a light source, such as automobile headlights, returns the light back toward the original source reaching the automobile driver’s eyes. The visibility of a person wearing garments incorporating Scotchlite reflective material can be optimized when the reflective material outlines the human form, is placed in movement locations, allows 360 degree visibility, and is present in sufficient amounts. Scotchlite reflective material – silver graphic transfer film system is designed for use on cotton, polyester, and cotton polyester blends.

Typical properties

Resources

Connect with us. We’re here to help.

Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist 1-800-243-4630 1-800-328-1667

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.