1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Motor Lead Splices
  6. 3M™ Motor Lead Pigtail Splice 5324, 5-8 kV, 250-500 kcmil (feeder), 4/0 AWG-500 kcmil (motor lead), 1/case

3M™ Motor Lead Pigtail Splice 5324, 5-8 kV, 250-500 kcmil (feeder), 4/0 AWG-500 kcmil (motor lead), 1/case

Part Number 53243M ID 7000006044UPC 00054007122746
    View all details
    View Legal Disclaimer
    For industrial/occupational use only. Not for consumer sale or use.
    Attribute Name
    Cable Type
    Polymeric insulated cables
    Connection Type
    Pigtail (Non-shielded), Pigtail (Shielded)
    Insulation Outside Diameter
    0.75-1.12 Inch
    Insulation Outside Diameter Range
    0.75-1.12 in
    Insulation Outside Diameter Range (Metric)
    1.90 - 28.4 mm
    Lug/Stem Connector Included in Kit
    Lug Cover Length
    10.5-11.5 in
    Lug Cover Length (Metric)
    266.7-292.1 mm
    Maximum Bolt Length
    1-1/2 in
    Maximum Bolt Length (Metric)
    38.1 mm
    Maximum Conductor Size (Imperial)
    500 kcmil
    Maximum Conductor Size (Metric)
    240 mm²
    Maximum Feeder Lead Size
    500 kcmil
    Maximum Motor Lead Size
    500 kcmil
    Maximum Operating Voltage
    8 kV
    Minimum Conductor Size (Imperial)
    4/0 AWG
    Minimum Conductor Size (Metric)
    95 mm²
    Number of Conductors
    Number of Skirts
    Range Feeder Cable (AWG & kcmil)
    RoHS 2011/65/EU Compliant
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    Splice Type
    Pigtail Only
    TDS Required
    Units per Case
    5/8 kV

    3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, cold shrink tubes, silicone grease tubes, solvent cleaning cloths, splicing tape 130C and more. This shielded and non shielded splice kit features a slip on splice cover that is made of a durable EPDM rubber while mastic strips are used for moisture seal applications. It includes high dielectric constant stress control for reducing the size and electrical stress. This kit is perfect for splicing polyethylene/cross linked cable, ethylene propylene rubber cable, copper conductors and more. RoHS 2011/65/EU Compliant‎.

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

    For industrial/occupational use only. Not for consumer sale or use.

    3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.