3M™ Cubitron™ II Roloc™ Durable Edge Disc 966F

  • 3M Product Number 966F
  • 3M ID B5005289005

Cuts 2X faster than conventional ceramic abrasives

Removes 3.5X more material than conventional ceramic abrasives

Powered by 3M Precision-Shaped Grain, which stays sharp throughout the life of the disc

View more details

Details

Highlights
  • Cuts 2X faster than conventional ceramic abrasives
  • Removes 3.5X more material than conventional ceramic abrasives
  • Powered by 3M Precision-Shaped Grain, which stays sharp throughout the life of the disc
  • 3M™ Roloc™ quick-change attachment system allows for easy disc changes between grades or applications
  • 2-ply cloth backing makes this 966F disc more durable than 1-ply cloth discs, and less costly than fibre discs
  • Available in a broad range of grades from 24+ to 80+ for your specific application needs

3M™ Cubitron™ II Roloc™ Durable Edge Disc 966F offers a superior solution for tackling medium to high pressure grinding applications when a smaller-sized disc is needed. It excels in a wide range of applications on mild steel.

Cutting-Edge Performance
3M™ Cubitron™ II Roloc™ Durable Edge Disc 966F is designed with the durability to give your shop a competitive edge. By combining 3M Precision-Shaped Grain and a 2-ply backing, 3M engineers have created a disc that cuts 2X faster and removes 3.5X more material than conventional ceramic abrasives*.

More power. More parts per hour.
These discs represent a better solution for tackling medium and high-pressure small-disc grinding jobs. The newest addition to our legendary 3M™ Cubitron™ II Abrasive line also features our convenient Roloc™ quick attachment system for easy disc changes — saving you time in multi-step applications.

Powered by 3M Precision-Shaped Grain, 3M™ Cubitron™ II Roloc™ Durable Edge Disc 966F cuts exceptionally fast with less pressure and lasts longer than conventional abrasives. It excels in mild steel applications, and offers added durability for edge work.

Applications

  • Grinding
  • Weld prep
  • Deburring
  • Weld removal
  • Refining
  • Blending
* Results are based on an automated test run to approximately 50% of initial cut rate on 1018 steel using 3M™ Cubitron™ II Roloc™ Durable Edge Discs 966F, 3” Grade 36+ on a servo motor. Each cycle consisted of 55 seconds of grinding. Error bars represent +/- 1.0 standard deviation.

Typical properties

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.