3M™ MicroPES™ Laminated Flat Sheet Membranes

  • Options available
  • | Select product options for IDs.

The lamination of the membrane increases the mechanical stability and thus enables operation under challenging mechanical conditions

The 3M™ MicroPES™ Laminated Flat Sheet Membrane can be manufactured into filter plates by using common welding technologies in which the nonwoven side is welded to the frame

The 3M™ MicroPES™ Laminated Flat Sheet Membrane can withstand chemically enhanced cleaning procedures with the following common chemicals: hydrochloric acid, citric acid, acetic acid, sodium hydroxide, or sodium hypochlorite (pH 2 to pH 12) without affecting the characteristics and the mechanical stability of the membrane

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 210KB)

Details

Highlights
  • The lamination of the membrane increases the mechanical stability and thus enables operation under challenging mechanical conditions
  • The 3M™ MicroPES™ Laminated Flat Sheet Membrane can be manufactured into filter plates by using common welding technologies in which the nonwoven side is welded to the frame
  • The 3M™ MicroPES™ Laminated Flat Sheet Membrane can withstand chemically enhanced cleaning procedures with the following common chemicals: hydrochloric acid, citric acid, acetic acid, sodium hydroxide, or sodium hypochlorite (pH 2 to pH 12) without affecting the characteristics and the mechanical stability of the membrane
  • High mechanical strength offers good processability

The 3M™ MicroPES™ Laminated Flat Sheet Membrane is made from a membrane laminated to a nonwoven. 3M™ MicroPES™ Laminated Flat Sheet Membranes are intended for further processing by OEMs into frames for applications in MBR for industrial wastewater and municipal wastewater. In these applications the lamination of the membrane increases the mechanical stability and thus enables operation under challenging mechanical conditions.

Especially in wastewater applications the membrane provides a high-performance. In these applications the position of the retention layer in the cross section near the upstream side of the membrane eases the cleaning of the filter cake from the membrane surface. The 3M™ MicroPES™ Laminated Flat Sheet Membrane in this compound offers proven throughput performance excelling in applications that require high bacteria retention. Made from Polyethersulfone the membrane remains spontaneously wettable over long periods of time and does not require wetting agents after being dried or chemically cleaned.

Specifications

Resources

Ask a 3M Expert

  • All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Submit

Our apologies...

An error has occurred while submitting. Please try again later...

Thank you!

Your form was submitted successfully