3M™ Novec™ 2704 Electronic Grade Coating

3M(TM) Novec(TM) 2704 Electronic Grade Coating

1 of 2

Hover to zoom

Easy application and processing – dries in seconds without the need for thermal post-curing
Requires little or no masking
Allows solder-through repairability and is easily removed for rework & repair
Contains a low level of volatile organic compounds (VOCs) and has low global warming potential

Typical Properties

Attribute Name	Value
Application	Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
Application Method	Solution applied by dipping (preferred), spray, or syringe dispense
Available Container Sizes	11 Ib (5.0 kg) 1 Gal Container
Brand	Novec™
Can Size	1 Liquid Gallon (US)
Coating Location	Electronic Device Components
Coating Thickness (Dip Coated)	200 nm - 1 µm (depending on application method)
Coverage Area	Depends on the application
Dielectric Constant	2.8 (@1kHz, 30%RH)
Dielectric Strength (V/mil)	3700 V/mil
Dissipation Factor	0.011 (@1kHz, 30% RH)
Dry Time	5 - 60 Seconds
Net Weight (Imperial)	0.18 lb, 11 lb, 33 lb
Net Weight (Metric)	14.97 kg, 5 kg, 81 g
Overall Height (Imperial)	15.3 in, 17 in
Overall Height (Metric)	38.862 cm, 43.18 cm
Overall Length (Imperial)	16.2 in, 9.563 in
Overall Length (Metric)	24.29 cm, 41.148 cm
Overall Width (Imperial)	16.2 in, 9.563 in
Overall Width (Metric)	24.29 cm, 41.148 cm
Polymer Type	Fluoroacrylate
Product Form	Liquid
Product Series	Novec 2704
Product Type	Protecting
Product Use	Printed Circuit Boards (PCB)
Removability	Removable with 3M™ Novec™ Engineered Fluid 72A or Novec 7200, Removable with 3M™ Novec™ Engineered Fluid 72DA or Novec 7200
RoHS 2011/65/EU Compliant	Yes
Solids Level	4 %
Storage Temperature	60 °F - 80 °F (16 °C - 27 °C)
Thermal Cure Time and Temperature	No need to cure
UV Detectable	Yes
Volume (Metric)	13.2 L, 3.78 L

Details

Easy application and processing – dries in seconds without the need for thermal post-curing
Requires little or no masking
Allows solder-through repairability and is easily removed for rework & repair
Contains a low level of volatile organic compounds (VOCs) and has low global warming potential
Is thermally and electrically stable with excellent dielectric properties
Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
Contains a UV fluorescent dye incorporated into the polymer for improved QC inspection

3M™ Novec™ 2704 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 4 wt% fluoropolymer carried in a hydrofluoroether solvent. It is UV detectable.

Additional Information 3M™ Novec™ 2704 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a low viscosity, low surface tension solution of a 4 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.

Resources

Brochures