Attribute Name
|
Value
|
---|---|
Application
|
Anti-stiction, Chemical Protection, Corrosion Protection, Moisture Protection, Protecting
|
Application Method
|
Brush, Dip, Selective Dispense, Spray
|
Brand
|
Novec™
|
Coating Location
|
Electronic Device Components
|
Coating Thickness Range (Metric)
|
<100 nm
|
Dielectric Constant
|
3.2
|
Dielectric Strength
|
2000 V/mil
|
Dissipation Factor
|
0.002
|
Net Weight (Imperial)
|
12 lb, 2 oz
|
Net Weight (Metric)
|
5.4 kg, 81 g
|
Polymer Type
|
Fluoroacrylate
|
Product Series
|
Novec 1702
|
Removability
|
Removable with 3M™ Novec™ Engineered Fluid 7100, Removable with 3M™ Novec™ Engineered Fluid 72DA, Removable with 3M™ Novec™ Engineered Fluid 73DE
|
Specifications Met
|
Directive (EU) 2015/863, RoHS 2011/65/EU
|
Thermal Cure Time & Temperature
|
No Need to Cure
|
UV Detectable
|
No
|
Volume (Imperial)
|
2 fl oz
|
Volume (Metric)
|
59.147 mL
|
3M™ Novec™ 1702 Electronic Grade Coating is a lower solids version of Novec™ 1700. It is a clear, low viscosity, low surface tension solution of a 0.2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.
Additional Information 3M™Novec™ 1702 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components, it is a clear, low viscosity, low surface tension solution of a 0.2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.