The 3M™ Condensation Management Film Starter Kit (CMFi) includes five rolls of 3M™ Condensation Management Film to help manage intermittent condensation formed during the hot cleaning process in cooled food processing facilities. It includes film in 1-inch (two rolls), 2-inch (two rolls) and 4-inch (one roll) widths, plus an applicator.
The 3M™ Condensation Management Film (CMFi) Starter Kit includes five rolls of 3M™ Condensation Management Film, a system for management of condensation designed to manage intermittent pipe condensation that forms during the hot cleaning process in cooled food processing facilities. The surface of the thin anti-condensation film has channels that wick water via capillary action, which also increases the surface-to-volume ratio of the condensate, thereby increasing the evaporation rate. This starter kit includes film in 1-inch (two rolls), 2-inch (two rolls) and 4-inch (one roll) widths, plus an applicator. Refer to the CMFi How to Apply bulletin (70-0716-9840-4) to determine proper tape width for specific situations.
NOTE: This product is NOT for use in managing continuous condensation such as a cold pipe in a warm room or freezer tunnel entrances. This product does not contain an antimicrobial. THIS PRODUCT MAY CONTAIN NATURAL RUBBER LATEX WHICH MAY CAUSE ALLERGIC REACTIONS.
Bringing Better Ideas to the Surface Through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.