3M™ NanoSHIELD™ Hollow Fiber Series Filter Cartridge

17  Products
  • 3M™ NanoSHIELD™ Hollow Fiber Technology offers a thicker membrane than flat sheet membrane, maximizing the depth of filtration for particle reduction efficiency
  • Provides low operating and differential pressure across the filter to reduce outgassing and micro-bubble formation
  • Available in Polypropylene, Polyethylene, and Nylon hollow fiber membrane, all with polyethylene cage and end caps
  • Reduces hold-up volume and “dead space” by eliminating the filter core
 More...
View all details
Overall Diameter (Imperial)
Overall_Diameter_Imperial
Overall Length (Imperial)
Overall_Length_Imperial
Micron Rating
Micron_Rating
End Modification
End_Modification
17 Products Available
Available options:
 Overall Diameter (Imperial), Overall Length (Imperial), Micron Rating and End Modification
All Options
Close
Specifications
Attribute Name
Value
Application
Developers, Electronics, Etchants, Polyimide, Solvents, Strippers
Brand
NanoSHIELD™
End Configuration
222 O-Ring and Flat Cap
End Modification
222 O-Ring & Flat Cap
Filter Material
Polypropylene Fiber
Filter Technology
Membrane
Filter Type
Filter Cartridge
Gasket/O-ring Material
PTFE Encapsulated Fluorocarbon
Industries
Industrial
Maximum Operating Temperature (Celsius)
40 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
104 Degree Fahrenheit
Micron Rating
0.005 μm, 0.01 μm, 0.02 μm, 0.05 μm, 0.1 μm
Overall Diameter (Imperial)
2.75 in
Overall Diameter (Metric)
6.99 cm
Overall Length (Imperial)
10 in, 20 in, 5 in
Overall Length (Metric)
12.7 cm, 25.4 cm, 50.8 cm
Product Type
Cartridge, Filter Cartridge
Series
NanoSHIELD™ Hollow Fiber Series
Units per Case
1
Product Details
  • 3M™ NanoSHIELD™ Hollow Fiber Technology offers a thicker membrane than flat sheet membrane, maximizing the depth of filtration for particle reduction efficiency
  • Provides low operating and differential pressure across the filter to reduce outgassing and micro-bubble formation
  • Available in Polypropylene, Polyethylene, and Nylon hollow fiber membrane, all with polyethylene cage and end caps
  • Reduces hold-up volume and “dead space” by eliminating the filter core
  • Reduces particles, gels, and micro-bubbles
  • Available in 5nm to 100nm filtration ratings, in 5” to 20” cartridges (consult datasheet for availability)

3M™ NanoSHIELD™ Hollow Fiber Series filter cartridge is avail­able with membrane material of construction of polypropylene, polyethylene and nylon. 3M™ NanoSHIELD™ hollow fiber series filters have been engineered to com­bine a high level of particle retention with high flow rates and low pressure drop for the most demanding applica­tions in the latest technology node.

3M™ NanoSHIELD™ Hollow Fiber Series filters have been engineered to combine a high level of particle retention with high flow rates and low pressure drop for the most demanding applications in the latest technology node. All 3M™ NanoSHIELD™ hollow fiber series filters are critically cleaned and integrity tested to provide low extractable levels and process repeat­ability out of the box.

3M™ NanoSHIELD™ Hollow Fiber Series filter cartridges provide up to twice the surface area and higher flow rates when compared to pleated membrane cartridges. This increase to flow and decrease to pressure drop allows a typical 10” 3M™ NanoSHIELD™ Hollow Fiber Series filter cartridge to perform similarly to a 20” conventionally pleated filter cartridge. This significant advantage allows for the use of smaller and less costly filter housings which reduce hold-up volume, filter change-out times, and total cost-of-ownership for the life of the process. In addition, Hollow Fiber Technology offers a membrane that is up to 2 times thicker than flat sheet membranes typically used in the lithography industry which in turn maximizes the depth of filtration and particle removal efficiency.

3M™ NanoSHIELD™ Hollow Fiber Series Cartridge is available in polypropylene, polyethylene and nylon membranes. This provides low metallic/ionic contamination and excellent resistance to many chemicals. Metallic or ionic contaminants can extract from surface modified and improperly manufactured filters, which may reduce shelf life and or change the photo-speed, viscosity, or molecular weight of advanced chemicals. For this reason, all 3M™ NanoSHIELD Hollow Fiber Series filters are critically cleaned and integrity tested to provide low extractable levels and process repeatability out of the box.

The compact design of 3M™ NanoSHIELD™ Hollow Fiber Series filter cartridges make them ideally suited for critical applications requiring low hold-up volume with superior flow rates and high particle retention from 100 nm down to 5 nm.

A History of Innovation 
For more than a century, 3M has applied innovation and technology to improving customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. The 3M brand, across thousands of products, represents consistency, superior quality, and value. Success begins with a culture of creative collaboration that inspires a never ending stream of powerful technologies and product solutions that make life better. 3M has an ability to apply technologies – often in combination – to an endless array of real-world customer needs. Of course, all of this made possible by the people of 3M, and their singular commitment to make life easier and better for people around the world. 3M is committed to providing innovative, cost-effective products that help protect people, equipment, and our environment. 3M Purification Inc. (formerly CUNO Incorporated), provides filtration and separation solutions for residential, food service, science labs, industrial, marine, and other applications.