3M™ Dyneon™ Fluoroelastomer FT 2481, 55 lb (25 kg) box

Improved Resistance to Acid and Volume Swell
3M™ Dyneon™ Fluoroelastomer FT 2481 is a terpolymer gumstock without incorporated curatives. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FT 2481 should be banded on the mill several minutes prior to adding the blended dry ingredients. Additionally, Dyneon fluoroelastomer FT 2481 offers improved retention of elongation after long-term heat aging, compared with conventional 66% fluorine fluoropolymers. Once mixed, the compounded stocks have good scorch resistance and storage stability. Notably, FT 2481 also provides improved acid resistance, and resistance to volume swell by organic solvents, compared with conventional 66% fluorine fluoropolymers.

The Right Size to Fit the Job
This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FT 2481 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

Delivering Custom Solutions
3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FT 2481 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

• O-Rings and other compression molded goods