3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS
- | Select product options for IDs.
Details
Highlights
- PROFESSIONAL-GRADE ADHESIVE: Bonds to bare, oily metals, as well as a wide variety of other materials, including most plastics
- VERSATILE APPLICATION: Ideal for specialty vehicles, HVAC, signage, appliances, and metal fabrication
- FOR POWDER COATING OR PAINTING: Withstands powder coat and paint bake cycles up to 400 °F (200 °C) for at least 30 minutes
- TOUGH AND LASTING BONDS: Offers high durability and impact strength in a temperature as low as -40 °F (-40 °C)
- TIME TO ADJUST: Offers up to 7 minutes of project adjustment time
- CURING TIME: Fully cured in approximately 24 hours at a temperature of 73 °F (23 °C)
- LITTLE PREP TIME: Works with minimal surface preparation, such as slightly oily metal bonding
3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive 8407NS is a gray structural adhesive with high overlap shear and peel strength with good impact resistance and durability. It is ideal for industrial applications where permanent, high-strength bonds with minimal surface preparation are required. This adhesive is designed to resist corrosion and bond bare metals like aluminum, cold-rolled steel, copper, brass, bronze, and even most plastics. Additionally, it provides excellent bond strength and impact resistance, even at temperatures as low as -40 °F (-40 °C). 3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive 8407NS is available in both bulk or a Duo-Pak (DP); when using this adhesive in Duo-Pak form, rely on 3M™ Applicators for convenient and accurate metering, mixing, and dispensing.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Bonds to a Variety of Substrates and Resists Corrosion
Our 3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS bonds to a variety of materials (especially bare metals such as aluminum, cold rolled steel, copper, brass and bronze) while resisting corrosion. This gray structural adhesive can even bond slightly oily metal with minimal to no surface preparation. It provides excellent bond strength and impact resistance, even at temperatures down to -40°F (-40°C). 3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS is ideal for industrial applications where permanent, high-strength bonds are required. Using our adhesive helps eliminate the grinding process and surface finishing time associated with welding, spot welding and mechanical fasteners.
Recommended Applications
• Metal office furniture
• HVAC equipment
• Specialty vehicles (ambulance, trailer, fire truck)
• Recreational vehicles (snowmobiles and ATV's)
• Signage
• Appliances
• Metal fabrication
3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS Gray has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details.
3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS Gray should yield similar results as 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green, which has been tested for surface flammability, smoke, toxic gas generation, and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C, and Boeing BSS 7239 test methods.
Withstands Powder Coating and Paint Bake Cycles up to 400°F
Assemblies requiring powder coating or painting typically encounter extreme temperature challenges. Our 3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS is designed to withstand powder coat and paint bake cycles up to 400°F (204°C) for at least one hour.
Moderate Viscosity, Non-Sag Formula Won't Slump or Spread Excessively
3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS offers a non-sag, moderate viscosity formula that won't slump or sag excessively when applied, allowing for precise application while ensuring your adhesive remains directly where you apply it, even on vertical surfaces. Our 3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 6 minute work life and fast strength build-up at room temperature. It offers a long shelf life, with no refrigeration necessary.
Easy Adhesion with Acrylic Adhesives
Acrylic adhesives are two-part structural adhesives that provide excellent bond strength and durability. Often referred to as "epoxy adhesives" or "epoxy glue", acrylics actually belong to a separate chemical family with their own unique characteristics. Acrylic adhesives have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.
Click here for more information on 3M Structural Adhesives. (PDF, 16 Mb)
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
