Scotch-Brite™ Star Pack 944S, 5 Packs/Case
- 3M Product Number 944S
- 3M ID 7100031694
- UPC 00048011182551
Details
Highlights
- Spring-like action of spindles permits abrasive to bend easily and fit inside hard-to-reach areas
- May be used in conjunction with 3M mandrel 944 for easy fastening and attachment to abrasive tools
- Contains coarse (CRS) and very fine (VFN) grades, so desired finish is achievable
- Versatile range of sizes to accommodate versatile sizes of pipes and tubes
- Open web is load resistant, helping to keep mineral cutting sharp and prolong abrasive service life
Scotch-Brite™ Star Pack 944S was designed for blending, deburring and finishing hard-to-reach internal diameters, including metal tubing and piping.
Scotch-Brite™ Star Pack 944S contains stars of varying sizes and grades for a robust introductory set. Each star has six spindles attached to an eyelet. Made with nonwoven technology, the spindles are spongy, buoyant and flexible. Consequently, they can bend and move to accommodate the insides of metal tubes and pipes. Scotch-Brite™ Star comes in small sizes, with the smallest diameter being 1-1/2 inches and the largest diameter being 4 inches. The small size supplements the spongy spindles, helping the abrasive fit inside hard-to-reach areas. These stars lightly deburr and blend contours and ridges without gouging or marring the surface, helping to reduce scraps and rework. Stars may be used on a variety of metals: stainless steel, aluminum, carbon steel, cast iron, titanium and non-ferrous metals.
Ease of Use
3M™ Mandrel 944 is included in the kit. The threaded attachments on the stars fasten to the mandrel for safe use on a die grinder. Scotch-Brite™ Stars require low pressure when used at correct operating speeds. Stars in the introductory pack come in both coarse (CRS) and very fine (VFN) grades. Use a coarse abrasive when blending defects or refining previous scratches, and use a very fine abrasive when a soft, fine scratch pattern is desired.
Nonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.
Scotch-Brite™ Star Pack 944S is a great introductory kit for operators who need to blend, deburr and finish a variety of metal parts. The versatile range of sizes and grades included in the pack provide an economical means for finding the right star for your specific part.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
