3M™ Particulate Filter 5P71/07194(AAD), P95 100 EA/Case

  • 3M ID 7000002054
  • UPC 50051131071945

NIOSH approved for environments containing certain oil and non-oil-based particles

Use on top of 3M™ 5000 Series Respirators or 6000 Series gas and vapor cartridges with 3M™ 501 Retainer when particles are also present

Use on top of 3M™ 603 Filter Holder and 3M™ 501 Retainer to reduce particulate exposure

View more details

Details

Highlights
  • NIOSH approved for environments containing certain oil and non-oil-based particles
  • Use on top of 3M™ 5000 Series Respirators or 6000 Series gas and vapor cartridges with 3M™ 501 Retainer when particles are also present
  • Use on top of 3M™ 603 Filter Holder and 3M™ 501 Retainer to reduce particulate exposure
  • Wide range of applications reduces inventory needs and training requirements
  • Pack of 6 replacement filters

Packout consists of 6 each (3 pair) of Particulate P95 Filters (5P71). Can be used with 3M™ 5000 Series Respirators or 3M™ 6000 Series Cartridges or 3M™ Filter Adapter 603, and 3M ™ Filter Retainer 501.

The 3M™ Replacement P95 Particulate Filter 5P71-6 helps provide respiratory protection against a wide range of oil and non-oil based particulate contaminants. Use with appropriate 3M™ 5000 Series Respirators or 6000 Series cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, and pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter protects against: 1) solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances; 2) liquids or oil based particles from sprays that do not emit harmful vapors; and 3) metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals. Pack includes 6 replacement filters. The filter works with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain or non-oil based particles. This filter has been rated P95, which means it filters at least 95% of airborne particles and is strongly resistant to oil. Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 5P71 to help reduce exposure to certain particles.

Typical properties

Resources

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.