1. United States
  2. All 3M Products
  3. Coatings
  4. Electronics Coatings
  5. 3M™ Novec™ 1710 Electronic Grade Coating

3M™ Novec™ 1710 Electronic Grade Coating

Part Number Novec 1710
  • Can be used as a concentrate for maintaining coating solids concentration in application baths or incorporated with resins or other liquids for a unique solution.
  • Easy application and processing – dries in seconds without the need for thermal post-curing
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
 More...
View all details
Typical Properties
Attribute Name
Value
Application
Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
Application Method
Solution applied by dip, brush, spray or syringe dispense
Available Container Sizes
12 lb (5.4 kg) 1 Gal Container
Brand
Novec™
Coating Location
Electronic Device Components
Coating Thickness (Dip Coated)
Depends on diluted concentration
Dielectric Constant
3.2 (@1kHz, 30%RH)
Dielectric Strength (V/mil)
2000 V/mil
Dissipation Factor
0.002 (@1kHz, 30% RH)
Dry Time
<2 Minutes
Net Weight (Imperial)
12 lb, 40 lb
Net Weight (Metric)
18.14 kg, 5.4 kg
Polymer Type
Fluoroacrylate
Product Form
Liquid
Product Series
Novec 1710
Product Type
Electrical Coatings, Protecting
Product Use
Printed Circuit Boards (PCB)
Removability
Removable with 3M™ Novec™ Engineered Fluid 72DA, 3M™ Novec™ Engineered Fluid 73DE or 3M™ Novec™ Engineered Fluid 7100
RoHS 2011/65/EU Compliant
Yes
Solids Level
10 %
Storage Temperature
60 °F - 80 °F (16 °C - 27 °C)
Thermal Cure Time and Temperature
No need to cure, dries at room temperature
Volume (Metric)
13.2 L, 3.78 L
Details
  • Can be used as a concentrate for maintaining coating solids concentration in application baths or incorporated with resins or other liquids for a unique solution.
  • Easy application and processing – dries in seconds without the need for thermal post-curing
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

3M™ Novec™ 1710 Electronic Grade Coating is a higher solids version of Novec™ 1700. It is a clear, low viscosity, low surface tension solution of a 10 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

Additional Information 3M™ Novec™ 1710 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components, It is a clear, low viscosity solution of a 10 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. It can be used as a concentrate to replenish coating solids in application baths or as a component with other materials to create unique liquid solutions.