1. All 3M Products

Standard Abrasives™ Surface Conditioning FE Disc

32  Products
  • High edge durability and flexibility
  • Designed for blending, coating removal, finishing, and light deburring
  • Aluminum Oxide on FE material provides high initial and extended cut rate
  • Most efficient on ferrous materials when high contact pressure and stock removal are required
 More...
Grade
Diameter
Center Hole Diameter
Max RPM
Converted Form
32 Products Available
Available options:
 Grade, Diameter, Center Hole Diameter, Max RPM and Converted Form
All Options
Showing 24 of 32
Close
Specifications
Attribute Name
Value
Attachment Type
Hook and Loop
Brand
Standard Abrasives™
Center Hole Diameter
0.37 in, 0.62 in, 0.87 in
Center Hole Diameter (Metric)
15.748 mm, 22.098 mm, 9.398 mm
Color
Blue, Brown, Red, Dark Blue, Dark Brown, Dark Maroon
Converted Form
Disc
Diameter
10 in, 24 in, 27 in, 36 in, 4 in, 4.5 in, 48 in, 5 in, 6 in, 7 in, 8 in
Diameter (Metric)
101.6 mm, 114.3 mm, 1219.2 mm, 127 mm, 152.4 mm, 177.8 mm, 203.2 mm, 254 mm, 609.6 mm, 685.8 mm, 914.4 mm
Form Material
FE
Grade
Coarse, Medium, Very Fine
Max RPM
6000, 7000, 8000
Mineral Type
Aluminum Oxide
Product Form
Disc
Product Details
  • High edge durability and flexibility
  • Designed for blending, coating removal, finishing, and light deburring
  • Aluminum Oxide on FE material provides high initial and extended cut rate
  • Most efficient on ferrous materials when high contact pressure and stock removal are required
  • Available with Hook and Loop attachment

Our Standard Abrasives™ Surface Conditioning FE Disc combines high edge durability and flexibility with high initial and extended cut rate for edge work, deburring and blending of all metal types on both flat and contoured surfaces.

Standard Abrasives™ Surface Conditioning FE Disc
Use with right angle tool
Tough Woven Fabric
Standard Abrasives™ Surface Conditioning Discs provide a more compact structure of non-woven fibers than Buff & Blend products. Our FE disc has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disc and allows for extended use on ferrous materials or steel. This is the best material to use when high contact pressure and stock removal are required.

Hook and loop attachment system provides fast disc change-out for multi-step finishing processe
Hook and loop attachment system provides fast disc change-out for multi-step finishing processes
Mixed Materials
Our Standard Abrasives™ Surface Conditioning FE Discs are made of a tough, but flexible nylon mesh that fits any contoured surface. This mesh is also laced with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and should be used for applications on ferrous metals and composites. Aluminum oxide discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades ranging from Very Fine to Coarse.

Strong Backing for Better Performance
For the best results, it is recommended that a Standard Abrasives™ brand holder pad be used. Tests have shown that surface conditioning discs, when used in conjunction with the Standard Abrasives holder pad, have a greater durability and performance rate. These pads also assure that pressure is applied evenly all the way to the edge of the disc.

  Surface Conditioning Material
  FE GP RC XD
Product Applications        
Deburr: Remove burrs, weld spatter,
die cast flash and parting lines
Blend: Blend mill marks, tool marks,
mismatches, scratch patterns
Clean: Remove corrosion, paint, coatings,
gaskets, adhesives, scale and rust
   
Finish: Cosmetic graining, polishing welds,
reduce roughness, condition grind lines
   
Materials        
Ferrous
Non-Ferrous  
Aluminum      
High Nickel/Chrome Alloys  
Stainless Steel  
Composites    
Performance        
Durability Good Best Better Best
Contact Force Required Medium Low Medium Heavy
Initial Rate of Cut Best Better Good Best
Flexibility Medium Most Medium Least
Grades        
Extra Coarse Dark Brown
Coarse (Approximately 60 Grit) Brown Dark Brown Brown Brown
Medium (Approximately 80 - 120 Grit) Maroon Dark Maroon Maroon Maroon
Very Fine (Approximately 180 - 240 Grit) Blue Dark Blue Blue


Each of the four Standard Abrasives™ Surface Conditioning materials offers unique benefits

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 76ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Send