1. All 3M Products

Standard Abrasives™ Multi-Finish Wheel

17  Products
  • Low density wheel covers more surface area when light pressure is applied
  • Silicon carbide mineral, available in a range of grade, cuts sharp for final finishing
  • Runs smooth for less operator fatigue
  • Non-metallic nylon fibers prevent workpiece contamination, including smears and blemishes
 More...
Width
Grade
Diameter
Center Hole Diameter
Max RPM
17 Products Available
Available options:
 Width, Grade, Diameter, Center Hole Diameter and Max RPM
All Options
Close
Specifications
Attribute Name
Value
Attachment Type
Center Hole
Brand
Standard Abrasives™
Center Hole Diameter
1 in, 3 in, 5 in
Center Hole Diameter (Metric)
127 mm, 25.4 mm, 76.2 mm
Density
2, 3
Diameter
12 in, 6 in, 8 in
Diameter (Metric)
152.4 mm, 203.2 mm, 304.8 mm
Form Type
Convolute
Grade
Coarse, Medium
Max RPM
3000, 4500, 6000
Mineral Type
Silicon Carbide
Product Form
Wheel
Width
0.5 in, 1 in, 2 in, 3 in, 4 in
Width (Metric)
101.6 mm, 12.7 mm, 25.4 mm, 50.8 mm, 76.2 mm
Product Details
  • Low density wheel covers more surface area when light pressure is applied
  • Silicon carbide mineral, available in a range of grade, cuts sharp for final finishing
  • Runs smooth for less operator fatigue
  • Non-metallic nylon fibers prevent workpiece contamination, including smears and blemishes
  • Open web conforms to workpiece, preventing undercutting and gouging

Standard Abrasives™ Multi-Finish Wheel is a low density, durable wheel used primarily for applications requiring a linear scratch and final finish on surfaces where no edges or burrs are present.

Standard Abrasives™ Multi-Finish Wheel
Produces satin finish to
architectural hardware and grain
finish prior to anodizing
Low Density, High Performance
We purposefully engineered our Standard Abrasives™ Multi-Finish Wheel is designed by mixing silicon carbide mineral and nonwoven nylon fibers with resin to create an open web. Although it dulls more quickly, silicon carbide is harder and sharper than most aluminum oxides. Combining sharp cutting mineral with low pressure makes for a good, soft scratch pattern that users desire during final finishing. The mineral comes in fine (FIN), medium (MED) and coarse (CRS) grades. Users should opt for a fine grade for the softest scratch pattern and a coarser grade for a rougher scratch pattern.
 
Standard Abrasives™ Multi-Finish Wheel is a low density, durable wheel used primarily for applications requiring a linear scratch and final finish on surfaces where no edges or burrs are present.
Blends coated abrasive
scratches and surfaces
to match a #4 mill finish
and is smear resistant
Soft Scratch Patterns
The Standard Abrasives™ Multi-Finish Wheel is designed by mixing silicon carbide mineral and nonwoven nylon fibers with resin to create an open web. Although it dulls more quickly, silicon carbide is harder and sharper than most aluminum oxides. Combining sharp cutting mineral with low pressure makes for a good, soft scratch pattern that users desire during final finishing. The mineral comes in fine (FIN), medium (MED) and coarse (CRS) grades. Users should opt for a fine grade for the softest scratch pattern and a coarser grade for a rougher scratch pattern.

Benefits of Open Web Abrasives
Nonwoven fibers in open web break down during grinding to reveal new mineral, and the benefits are twofold. First, mineral renewal lends itself to a consistent scratch pattern, applied evenly throughout the life of the abrasive. Second, even attrition, or uniform breakdown of the fibers, prevents chunking or dusting. Because they are non-metallic, the nylon fibers do not contaminate metal; they won't melt or produce the heat-induced smears and blemishes that might result from metal on metal.

Combining buoyant, responsive nonwoven fibers with sharp-cutting silicon carbide mineral make this abrasive a great match for final finishing. It performs well when blending coated abrasive scratches or blending surfaces to match a #4 mil finish. Some other great applications include satin finishing on architectural hardware or grain finishes prior to anodizing.

Whether stainless steel fabricators or appliance and food equipment manufacturers, our multi-finishing wheel is designed to help users from multiple industries achieve the final finish they desire. From door hardware, to plumbing fixtures, aluminum extrusions, sanitary metal containers and dairy equipment, this wheel is a good abrasive product for final finishing on a range of workpieces.

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Send