Scotch-Brite™ Light Deburring Wheel

1 of 2

Hover to zoom

Provides a clean and economical system for removing fine burrs, yet resulting in a polished finish
Conformability offers consistent finishing while keeping fresh abrasive mineral continuously exposed
Non-woven web runs cool and lessens impact on heat-sensitive materials
Unique resin system produces less smearing, reducing clean and prep time

View all details

Overall Width (Imperial)

Overall_Width_Imperial

Overall Diameter (Imperial)

Overall_Diameter_Imperial

Center Hole Diameter (Imperial)

Center_Hole_Diameter

Max RPM

Max_RPM

Equipment - Machines

Equipment_-_Machines

71 Products Available

Available options:

Overall Width (Imperial), Overall Diameter (Imperial), Center Hole Diameter (Imperial), Max RPM and Equipment - Machines

Specifications

Attribute Name	Value
Abrasive Material	Silicon Carbide
Alternative Sale Availability	6. This item is for industrial use only and there are no VOC restrictions.
Application	Deburring, Finishing, Polishing
Application Category	Blending/Deburring, Finishing/Polishing
Attachment Type	Center Hole
Brand	Scotch-Brite™
Center Hole Diameter (Imperial)	1 in, 10 in, 3 in, 5 in, 8 in
Center Hole Diameter (Metric)	127 mm, 203.2 mm, 25.4 mm, 254 mm, 76.2 mm
Color Family	Gray
Density	6, 7, 8
Equipment - Machines	Centerless Grinders, Manual Backstand, Pressure Assit Backstand
Face Width (Imperial)	0.375 in, 0.5 in, 0.625 in, 0.75 in, 1 in, 1.5 in, 10 in, 2 in, 24 in, 3 in, 4 in, 5 in, 6 in
Face Width (Metric)	101.6 mm, 12.7 mm, 127 mm, 15.875 mm, 152.4 mm, 19.05 mm, 25.4 mm, 254 mm, 38.1 mm, 50.8 mm, 609.6 mm, 76.2 mm, 9.525 mm
Form Type	Convolute/Deburring
For Use On	All Metals
Grade	Fine
Industries	Marine, Metalworking
Market	Aerospace, Defense, Facilities Management
Max RPM	2250, 2550, 3000, 3600, 4500, 6000
National Stock Number	5345014459832
Overall Diameter (Imperial)	10 in, 12 in, 14 in, 16 in, 6 in, 8 in
Overall Diameter (Metric)	152.4 mm, 203.2 mm, 254 mm, 304.8 mm, 355.6 mm, 406.4 mm, 152.4 mm, 203.2 mm, 254 mm, 304.8 mm, 355.6 mm, 406.4 mm
Overall Width (Imperial)	0.375 in, 0.5 in, 0.625 in, 0.75 in, 1 in, 1.5 in, 10 in, 2 in, 24 in, 3 in, 4 in, 5 in, 6 in
Overall Width (Metric)	101.6 mm, 12.7 mm, 127 mm, 15.748 mm, 152.4 mm, 19.05 mm, 25.4 mm, 254 mm, 38.1 mm, 50.8 mm, 609.6 mm, 76.2 mm, 9.525 mm
Position	Good
Primary Application	Metalworking
Product Color	Gray
Product Form	Wheel
Segment	Maintenance
Substrate	All Metals
Substrate Category	Metal

Product Details

Provides a clean and economical system for removing fine burrs, yet resulting in a polished finish
Conformability offers consistent finishing while keeping fresh abrasive mineral continuously exposed
Non-woven web runs cool and lessens impact on heat-sensitive materials
Unique resin system produces less smearing, reducing clean and prep time
Multi-purpose wheel cleans, finishes, blends, deburrs, and polishes all types of metals, composites and glass

Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. We made this wheel with Soft construction and smooth operation to require less effort by the operator than a harder wheel.

Our Scotch-Brite™ Light Deburring Wheel is uniquely suited to applications where a moderate degree of conformability and density are needed to maintain critical tolerances while providing a fine polished finish. A unique resin system helps minimize smearing and reduces heat build-up. The Light Deburring Wheel runs cool and resists loading due to its non-woven web construction. We did this to reduce the risk of part discoloration and warping while extending the life of the wheel. The Light Deburring Wheel is available in fine grade abrasive.

Our Scotch-Brite™ Light Deburring Wheel uses fine grade silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.

Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We made this wheel with an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Resources

Brochures

3M Abrasives for Ortho Implant and Surgical Instrument Mfg. (PDF, 2.4MB)

Catalogs

3M Industrial Products for Metalworking Catalog Bookmark PDF (PDF, 56.0MB)

Safety Inserts

3M™ Abrasive Wheels (PDF, 703.5KB)

Customer Reviews

Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.

All fields are required unless indicated optional

*First Name
*Last Name
*Company
*Company Address
*Contact Phone
*Email Address
*Country/Region
*City
State/Province
*Zip Code
*Number of Abrasive Discs or Wheels You Plan to Purchase
*Total Number of Operators in your shop
Subscribe to our mailing list
3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.
Send