1. All 3M Products

Scotch-Brite™ Finishing Flap Brush

67  Products
  • Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
  • Provides more surface contact than bristle-type brushes
  • Continuously supplies fresh abrasives for consistent, uniform finishes
  • Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
 More...
Overall Width (Imperial)
Overall_Width_Imperial
Grade
Grade
Overall Diameter (Imperial)
Overall_Diameter_Imperial
Center Hole Diameter
Center_Hole_Diameter
Max RPM
Max_RPM
67 Products Available
Available options:
 Overall Width (Imperial), Grade, Overall Diameter (Imperial), Center Hole Diameter, Max RPM, Density Rating and Equipment - Machines
All Options
Showing 24 of 67
Close
Specifications
Attribute Name
Value
Application
Deburring, Finishing, Polishing, Surface Preparation
Application Category
Blending/Deburring, Cleaning, Finishing/Polishing
Attachment Type
Center Hole
Brand
Scotch-Brite™
Center Hole Diameter
10 in, 2 in, 3 in, 5 in
Center Hole Diameter (Metric)
127 mm, 254 mm, 50.8 mm, 76.2 mm
Color
Gray, Red, White, Gray, Maroon, White
Density
3, 5, 7
Density Rating
Hard, Medium, Soft
Equipment - Machines
Centerless Grinders, Die Grinders, Manual Backstand, Pressure Assit Backstand
Form Type
Flap Brush
For Use On
All Metals
Grade
Coarse, Fine, Medium, Super Fine, Very Fine
Industries
Marine, Metalworking
Max RPM
1500, 2500, 3200, 3400, 8500
Mineral Type
Aluminum Oxide, Silicon Carbide, Talc
Overall Diameter (Imperial)
12 in, 16 in, 3 in, 6 in, 8 in
Overall Diameter (Metric)
152.4 mm, 203.2 mm, 304.8 mm, 406.4 mm, 76.2 mm, 152.4 mm, 203.2 mm, 304.8 mm, 406.4 mm, 76.2 mm
Overall Width (Imperial)
1 in, 1.75 in, 11 in, 2 in, 3 in, 4 in, 5 in, 6 in
Overall Width (Metric)
10.16 cm, 101.6 mm, 127 mm, 152.4 mm, 25.4 mm, 279.4 mm, 44.45 cm, 5.08 cm, 50.8 mm, 76.2 mm
Position
Better
Primary Application
Metalworking
Product Form
Brush
Shank Diameter (Imperial)
0.25 in
Shank Size
0.25 in
Shank Size (metric)
6.35 mm
Sub Industries
Sub Applications
Substrate
All Metals
Product Details
  • Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
  • Provides more surface contact than bristle-type brushes
  • Continuously supplies fresh abrasives for consistent, uniform finishes
  • Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
  • Achieves decorative finishes on metal, wood, and composites

Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. Our long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Scotch-Brite™ Cut and Polish Flap Brush
Good for light to medium duty cleaning and finishing
Long-Lasting Brush Provides Improved Consistency
Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. Our long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Requires No Chemical Compounds
Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.

Our long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.
The key to the superior performance of Scotch-Brite brushes lies in their resilient, open web construction
Made with Aluminum Oxide Mineral
This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

The Many Benefits of Scotch-Brite™ Abrasives
Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 59ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Send