1. All 3M Products

3M™ Zeta Plus™ U & UW Series Filter Cartridge

21  Products
  • Products developed specifically for the filtration of Insulation oil used in power generation
  • Tight 10U & 10UW grades provide reduction of very fine particles
  • Water absorbent formulation provides superior water reduction capabilities (UW Grade)
 More...
Overall Diameter (Imperial)
Overall_Diameter_Imperial
Overall Length (Imperial)
Overall_Length_Imperial
End Modification
End_Modification
21 Products Available
Available options:
 Overall Diameter (Imperial), Overall Length (Imperial) and End Modification
All Options
Close
Specifications
Attribute Name
Value
Application
Automotive Top Coat Filtration, Resin Filtration
Brand
Zeta Plus™
End Modification
CTG ASSY, ZPLUS, CTG ASSY-ZP, CTG ASSY-ZPLUS, CTG-ASSY, ZETA PLUS, CTG-ASSY-ZP
Filter Material
Cellulose
Filter Type
Depth, Depth - Adsorptive
Gasket/O-ring Material
Cork, EPDM, EPR, Fluorocarbon, Nitrile, Silicone
Grade
05U, 05U2, 05U2W, 05UW, 10U, 10UW
Industries
Industrial
Maximum Operating Temperature (Celsius)
60 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
140 Degree Fahrenheit
Number of Cells
10, 12, 14, 16, 18, 6, 7, 8, 9
Product Series
U, U Premium, U2, UW
Series
Zeta Plus™ U Premium Series, Zeta Plus™ U Series, Zeta Plus™ U2 Series, Zeta Plus™ UW Series
Units per Case
1, 15, 2
Product Details
  • Products developed specifically for the filtration of Insulation oil used in power generation
  • Tight 10U & 10UW grades provide reduction of very fine particles
  • Water absorbent formulation provides superior water reduction capabilities (UW Grade)

Our Zeta Plus™ U & UW Series filters for the power generation industry are offered in two formulations. The U formulation is recommended for use with oils contaminated mainly with carbon particles, and the UW formulation is specifically formulated for use with oils contaminated with both carbon particles and moisture.

Zeta Plus charge-modified filter media uses electrokinetic adsorption to remove contaminants and colloid materials smaller than those filtered by mechanical sieving alone.
Zeta Plus charge-modified filter media uses electrokinetic adsorption to remove contaminants and colloid materials smaller than those filtered by mechanical sieving alone. Zeta Plus™ U & UW Series filter cartridges are used for reconditioning insulating oils in power generation. Two grades of media, 05 and 10, are available: 05 grade provides efficient reduction of particle contaminants in most insulation oil applications, while the 10 grade provides efficient reduction of ultrafine particles.

Effective Fine Particle and Moisture Reduction
As oil specifications get tighter, finer filtration is required to meet those demands. The 10U formulation was developed to help reduce smaller contaminants such as fine carbon particulate.

Water contaminates the dielectric oil either from the atmosphere or breakdown of the oil itself. Water contamination is usually accompanied by particulate contamination, which then increases both the filtration and water reduction workload. Zeta Plus U & UW series formulations help address both problems.

Automatic Shut-off upon Saturation
The construction of Zeta Plus™ Series 05UW and 10UW cartridges allow it to plug on saturation with water, effectively shutting off flow. This feature is important for two reasons. First, it provides a clearly defined end-point to filter life. Second, the automatic shut-off helps prevent recontamination of the filtrate with water.

User-Friendly Design
Optional cartridge reduction baskets are available for manually or mechanically installing and removing cartridges.

Learn More about the Zeta Plus Series Filter Cartridges (PDF, 859.9 Kb)

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English