1. 3M United States
  2. All 3M Products

3M™ Scotchcast™ Wye Resin Splice kit 82-B1N, 1-5 kV, Non-Shielded, 10/Case

Part Number 82-B1N3M ID 80611616741UPC 00051128613443
  • Designed for use on non-shielded cables
  • Insulates and seals wye splices for compression tap connectors
  • Fits both split bolt and crimped conductors
  • RoHS 2011/65/EU Compliant
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Application
Sealing, electrical insulation and mechanical protection
Brand
Scotchcast™
Cable Shielding
Single Conductor Portable Cable
Conductor Amount
Multiple, Single
Conductor Size Range
2/0-4/0 AWG
Conductor Sizes
2 AWG, 4 AWG
Conductor Sizes for 1 kV and less
4 AWG (Split Bolt)
Conductor Sizes for 5 kV
4 AWG (Split Bolt)
Crimped Maximum Conductor Sizes
2/0 AWG
Dielectric Strength
500 mV
Insulation O.D. Range
0.250 - 0.625 Inch
Insulation Outside Diameter Range
0.250 - 0.625 Inch
Insulation Outside Diameter Range (Metric)
6 - 16 mm
Manufacturing Origin
USA
Material
Epoxy
Maximum Cable Outside Diameter
0.25-0.625
Maximum Cable Outside Diameter (Metric)
16.0 mm
Maximum Conductor Size
4/0 AWG
Maximum Insulation Outer Diameter (Imperial)
0.625 in
Maximum Insulation Outer Diameter (Metric)
16 mm
Minimum Insulation Outer Diameter (Imperial)
0.25 in
Minimum Insulation Outer Diameter (Metric)
6.4 mm
National Stock Number
5975009923910
Product Color
Black
Product Type
Splice
Splice Type
Inline
Split Bolt Maximum Conductor Sizes
4 AWG
Voltage
5 kV
Voltage Rating
5 kV (single), 1 kV (multiple)
Details
  • Designed for use on non-shielded cables
  • Insulates and seals wye splices for compression tap connectors
  • Fits both split bolt and crimped conductors
  • RoHS 2011/65/EU Compliant
  • RoHS 2011/65/EU Compliant

3M™ Scotchcast™ Wye Resin Splice Kits are designed for insulating and sealing wye splices for compression tap connectors on power cables.

Insulates and seals wye splices for compression tap connectors (e.g., C tap or H tap) rated for cables up to 5 kV. Number of Conductors: 1 for 5 kV Multiple for 1 kV

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.