1. All 3M Products

3M™ Trizact™ PSA Film Disc Roll 568XA

Products
  • Microreplicated cerium oxide delivers high gloss, crisp reflection, richer appearance
  • 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Adhesive-backed discs easily peel off from the roll for quick handling and minimal downtime
  • Use wet for glass defect repair and solid surface finishing
 More...
Center Hole Diameter (Imperial)
Center_Hole_Diameter
Equipment - Machines
Equipment_-_Machines
Products Available
Available options:
 Center Hole Diameter (Imperial) and Equipment - Machines
All Options
Close
Specifications
Attribute Name
Value
Abrasive Material
Cerium Oxide
Application
Finishing, Sanding
Application Category
Orbital Sanding
Attachment Type
PSA
Backing Material
Film
Backing Thickness (Imperial)
3 mil
Brand
Trizact™
Center Hole Diameter (Imperial)
0.62 in
Center Hole Diameter (Metric)
15.748 mm
Color Family
White
Equipment - Machines
Manual Backstand, Random Orbital Sanders
Form Type
Liner
For Use On
Composites, Paint, Solid Surface, Topcoats
Industries
Composite, Marine, Woodworking
Overall Diameter (Imperial)
5 in
Overall Diameter (Metric)
127 mm, 127 mm
Position
Better
Primary Application
Woodworking, Composite & Advanced Materials
Product Color
White
Product Form
Disc Roll
Substrate
Composites, Paint, Solid Surface, Topcoats
Substrate Category
Composite, Paint & Primer
Product Details
  • Microreplicated cerium oxide delivers high gloss, crisp reflection, richer appearance
  • 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Adhesive-backed discs easily peel off from the roll for quick handling and minimal downtime
  • Use wet for glass defect repair and solid surface finishing

3M™ Trizact™ PSA Film Disc Roll 568XA utilizes microreplicated cerium oxide uniformly distributed across a 3-mil film backing to create a high gloss on glass, and solid surfaces. Use 568XA film discs wet. Pressure sensitive adhesive backing in disc roll form makes handling and attachment easy.

Finish and Repair Sensitive Surfaces
Designed with Trizact microreplicated cerium oxide, 568XA ensures a fast, consistent cut rate that easily removes defects such as scuffs, scratches and acid marks on table glass, airplane windscreens and windows, architectural glass and other solid surfaces. The film backing is water resistant and requires little water for touch-up, minimizing mess and processing steps.

Learn more about 3M™ Trizact™ Film for Finishing Solid Surfaces (PDF, 998.6 Kb)

Convenient PSA Disc Rolls Minimize Downtime
Our 3M™ Trizact™ PSA Film Disc Roll 568XA provides multiple adhesive-backed discs on a single roll of liner. This makes them easy to peel off one at a time, efficient to store and economical. The pressure sensitive adhesive coating on the backs is quick and simple to use — simply press the disc onto the backup pad and you're ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next disc

About Cerium Oxide
Cerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, thus making it one of the most effective abrasives for final polishing steps on solid surfaces. It is heat resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, ophthalmic lenses, precision optics and precious and semiprecious stone

3M™ Trizact™ PSA Cloth 237AA - Custom Sizes

Trizact Abrasives
3M™ Trizact™ abrasives are engineered using 3M microreplication — the creation of microscopic 3-dimensional structures applied to a backing in a uniform and precise pattern. These pyramid-like structures contain multiple layers of mineral. When they break down during use, fresh cutting mineral continues to be exposed so results are consistent throughout the life of the abrasive.

Ongoing sharp cutting action contributes to higher throughput, more uniform results and greater productivity.

Polishes and Leaves Glass Crystal Clear
Use 3M™ Trizact™ 568XA discs for a final polish. First, wet the surface slightly with a small amount of water. As you polish, the mineral "pyramids" will break down to form a slurry-like solution. The polishing action that occurs will remove scratches left by previous leveling steps.

For acrylic-filled solid surfaces, use 568XA damp as a final step to attain a high-gloss finish.

Remove silica coatings (anti-glare and static) and fluoric acid spots in a single step with 568XA.

 

 

 

 

 

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 81ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Send