1. All 3M Products

3M™ Trizact™ Hookit™ Foam Sheets, 30189, 5000, 2-3/4 in x 5 1/2 in (70 mm x 140 mm), 5 sheets per carton, 10 cartons per case

Part Number 301893M ID 60455069868UPC 00051131301894
  • Ideal for removing fine sand scratches where buffers won’t reach
  • Foam backing provides support for removing sand scratches up to P2500 prior to polishing
  • Reduces or eliminates compounding, saving time and material costs
  • Helps reduce rework due to visible scratches or dieback
 More...
Specifications
Attribute Name
Value
Brand
Trizact™
Case Quantity
10 Sleeves per Case
Grade Range
Fine (1200 - 5000)
Grit
5000
Mineral Type
Trizact
Number per Inner
5 Sheets per Sleeve
Overall Length (Imperial)
5.5 in
Overall Length (Metric)
140 mm
Overall Width (Imperial)
2.75 in
Overall Width (Metric)
70 mm
Performance Level
Best
Product Form
Sheet
Sanding Method
Hand, Machine
Vacuum Support
No
Wet or Dry
Wet or Dry
Product Details
  • Ideal for removing fine sand scratches where buffers won’t reach
  • Foam backing provides support for removing sand scratches up to P2500 prior to polishing
  • Reduces or eliminates compounding, saving time and material costs
  • Helps reduce rework due to visible scratches or dieback
  • Patterned, precise abrasive mineral structures provide a combination of fast cut and consistent finish
  • Hookit™ attachment works with Hookit™ hand sanding pads for fast, easy changeouts

Our 3M™ Trizact™ Hookit™ Foam Abrasive Sheet 443SA features a foam backing that provides support and conformability for removing fine grade (P1500 – P2500) swirl marks and scratches – ideal for painted surfaces where buffing is difficult. Microreplicated 3-D mineral abrasive structures are distributed uniformly across the surface and wear evenly for consistent finishes and longer sheet life.

 

3M™ Trizact™ Hookit™ Abrasive Sheet 443SA
Foam backing provides support for removing sand scratches
Advanced Abrasives for Collision Repair
For use during the critical stage before compounding, our 3M™ Trizact™ Hookit™ Foam Abrasive Sheet 443SA is excellent for removing fine grade scratches and swirl marks that are not easily removed by buffing. Sheets are backed by sturdy but flexible foam that provides support, conformability and consistent contact with the surface for fine grade sand scratches up to P2500. These sheets are ideal for creating refined finishes with less rework associated with dieback and visible scratches in painted surfaces. In specific situations, operators can even eliminate the compounding step in collision repair, saving extra time and material costs. Foam-backed hand sanding sheets feature our Trizact™ abrasives, built to stay sharper longer to reduce material costs. Trizact™ Hookit™ abrasive sheets also feature our Hookit™ system for fast, efficient changeouts during the paint finishing process.

Use Trizact™ Hookit™ Foam Abrasive Sheet 443SA for wet or dry sanding to remove P1500-P2500 grade sand scratches. For best results, use with our 3M™ Hookit™ Foam Hand Sanding Pad PN 05612.
 
Ideal for removing fine sand scratches where buffers won't reach
Small 3-dimensional structures are uniformly distributed over the surface of the abrasive
About Our Trizact™ Abrasives
For more predictable finishes and improved, consistent quality, 3M™ Trizact™ abrasive sheets feature microreplication (PDF, 6.8 Mb) — small 3-dimensional structures are reproduced and then uniformly distributed over the surface of the abrasive. These patterned, precise mineral structures contain multiple layers of abrasive mineral. As the structures wear, fresh, sharp mineral is exposed. The result is that the abrasive cuts faster, allows for precise finish control, and stays sharper longer — operators can even reduce grade sequences during collision repair, requiring fewer process steps and fewer abrasive products.

About Our Hookit™ Attachment System
The Hookit™ hook-and-loop feature makes sheet attachment, removal and re-attachment clean and easy, and facilitates use and re-use of the sheets for the extent of the abrasive life. Hookit™ hand sanding pads have J-shaped hooks of the type most commonly used in everyday hook-and-loop applications. These hooks instantly grip the brushed nylon loops on our Hookit™ abrasives. It's simple: just slap the sheet on and start sanding. Sheets remove just as cleanly and easily, and can be re-used again and again for the extent of the abrasive life. The Hookit™ system is designed for work spaces where adhesive backed discs may become contaminated by dust, dirt, or flying debris.

The Science of Better Sanding from 3M™
3M™ has put the latest science into each step toward achieving precision finishes in collision repair. Our 3M™ Trizact™ Hookit™ Foam Abrasive Sheet 443SA is a terrific example. From its foam backing to its time-saving hook-and-loop attachment to its microreplicated abrasive, it is ideal removing fine grade scratches by hand before compounding — a clean, scratch-free surface, in less time.

 

Customer Reviews
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English