1. All 3M Products

3M™ Trizact™ Cloth Belt 217EA

81  Products
  • Microreplicated pyramids wear away to continually expose fresh mineral for a consistent cut throughout the life of the belt
  • Flexible JE-weight cotton cloth backing flows over contoured surfaces for consistent finishing
  • Consistency and long abrasive life make this belt great for use in robotic applications
  • For intermediate finishing and fine polishing prior to plating or buffing
 More...
Width
Length
Equipment - Machines
Grit
Micron Grade
81 Products Available
Available options:
 Width, Length, Equipment - Machines, Grit and Micron Grade
WHERE TO BUY
All Options
Showing 24 of 81
Close
Specifications
Attribute Name
Value
Application
Finishing, Grinding, Polishing
Backing Material
Rayon Cloth
Backing Weight
JE Weight
Brand
Trizact™
Color
Beige, Tan
Equipment - Machines
Bench Top Motors, Manual Backstand, Pressure Assit Backstand, Wide Belt Sanders
Flex Type
Full-Flex, Fullflex
Form Type
Scalloped Edge
For Use On
Aluminum, Carbon Steel, High Nickel Alloy, Soft Metals, Stainless Steel, Titanium/Zirconium
Grit
A16, A30, A45, A65
Industries
Marine, Metalworking
Length
106 in, 118 in, 132 in, 148 in, 15.5 in, 168 in, 24 in, 264 in, 37 in, 48 in, 60 in, 64 in, 72 in, 73 in, 77 in, 84 in, 90 in, 96 in
Length (Metric)
1219.2 mm, 1524 mm, 1625.6 mm, 1828.8 mm, 1854.2 mm, 1955.8 mm, 2133.6 mm, 2286 mm, 2438.4 mm, 2692.4 mm, 2997.2 mm, 3352.8 mm, 3759.2 mm, 393.7 mm, 4267.2 mm, 609.6 mm, 6705.6 mm, 939.8 mm
Micron Grade
A100, A16, A30, A45, A5, A65, A80
Mineral Type
Aluminum Oxide
Position
Best for Finishing, Best for Finishing Soft Metals
Product Form
Belt
Splice Type
Film Media Splice, Film-Lok
Sub Industries
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plating & Polishing, Plumbing Fixtures, Turbine Engines
Substrate
Aluminum, Carbon Steel, High Nickel Alloy, Soft Metals, Stainless Steel, Titanium/Zirconium
Width
1 in, 1.25 in, 1.5 in, 2 in, 2.125 in, 2.25 in, 2.37 in, 2.5 in, 3 in, 3.5 in, 4 in, 5 in, 6 in
Width (Metric)
101.6 mm, 127 mm, 152.4 mm, 25.4 mm, 31.75 mm, 38.1 mm, 50.8 mm, 53.98 mm, 57.15 mm, 60.198 mm, 63.5 mm, 76.2 mm, 88.9 mm
Product Details
  • Microreplicated pyramids wear away to continually expose fresh mineral for a consistent cut throughout the life of the belt
  • Flexible JE-weight cotton cloth backing flows over contoured surfaces for consistent finishing
  • Consistency and long abrasive life make this belt great for use in robotic applications
  • For intermediate finishing and fine polishing prior to plating or buffing
  • Ideal for light pressure applications, allows abrasive to break down and maintain cut and produce consistent finishes
  • Produces finer finishes than conventional coated abrasives
  • Grinding aid helps prevent heat-related warping and discoloration

3M™ Trizact™ Cloth Belt 217EA uses proprietary microreplication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

 

Trizact mineral structure comparison

Controlled Breakdown for Consistent Finishing
The abrasive and resin structure for the 3M™ Trizact™ Cloth Belt 217EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. This belt also features a grinding aid that helps prevent heat buildup, warping and discoloration.

The belt is constructed on a JE-weight, durable cloth backing that helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive provides heat resistance and helps prevent delamination.

Ideal for Robotic Finishing and Polishing
Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.

 

 

Two Trizact™ belts and three metal plumbing fixtures
For intermediate finishing and fine polishing prior to plating or buffing

Runs Smooth, Finishes Consistently
A film media splice minimizes "chatter marks" and ensures smooth running and consistent results. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer.

 

 

 

 

 

 

 

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 57ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Send