1. All 3M Products

3M™ Thermally Conductive Acrylic Interface Pad 5510H

Products
  • High thermal conductivity
  • Good softness and conformability even to non-flat IC surfaces and heat spreading blocks
  • Good flame retardant, UL 94 V-0 equivalent material
 More...
Overall Length (Metric)
Overall_Length_Metric
Overall Thickness (Metric)
Overall_Thickness_Metric
Products Available
Available options:
 Overall Length (Metric) and Overall Thickness (Metric)
All Options
Close
Specifications
Attribute Name
Value
Adhesive Type
Non-adhesive
Brand
3M™
Electrical or Thermal
Thermally Conductive
Overall Length (Metric)
20 m, 30 m
Overall Thickness (Metric)
1 mm, 1.5 mm
Overall Width (Imperial)
9.45 in
Overall Width (Metric)
240 mm
Details
  • High thermal conductivity
  • Good softness and conformability even to non-flat IC surfaces and heat spreading blocks
  • Good flame retardant, UL 94 V-0 equivalent material

3M™ Thermally Conductive Acrylic Interface Pad 5510H is a very conformable and soft pad with high thermal conductivity of 2.0 W/m-K (3M test method). This pad consists of a slightly tacky acrylic elastomeric sheet filled with thermally conductive ceramic particles. It is designed to transfer heat from heat generating components to heat sinks and cooling devices, improving device reliability and extending the component's life.

3M™ Thermally Conductive Acrylic Interface Pad 5510H has a soft pad that conforms to uneven substrates, providing excellent wettability to fill gaps for improved thermal performance. This pad performs well in high temperatures, maintaining its thermal conductivity and softness up to 130℃. The thin, firm, low-tack layer provides easy handling for pre-assembly and die-cutting. This pad provides robust thermal management for applications in a variety of market segments, such as consumer electronics, automotive, LED lighting, medical devices, communication infrastructure, and aerospace & defense.


Our family of 3M™ Thermally Conductive Acrylic Interface Pads provide low-outgassing and high-performance solutions compared to silicone. These acrylic pads have no siloxane VOC or oil bleeding, which are associated with silicone products and can often cause device failure. They are lightweight, making them ideal for applications with finer spacing requirements and a small footprint. 3M™ Thermally Conductive Acrylic Interface Pads have good electrical insulation properties to protect against electrical interference and device breakdown.


Recommended Applications:
Heat transfer between PCB and heat sink
Decrease of compression stress to electronic parts by thermal pad softness
Gap filling in electronic devices
Chip on film (COF) heat dissipation
Power electronic component thermal management


Examples:
LED displays
Electric vehicle (EV) batteries
Wireless charging units
Satellite navigation
Sensors
Process control equipment
Test & measurement devices