1. All 3M Products

3M™ Stainless Steel Finishing System

Part Number 967A3M ID 60440273419UPC 00051141556062
  • STEP ONE - LEVEL THE WELD
    Remove the weld with 3M™ Cubitron™ II Fibre Disc 987C, grade 60+. Set the grain, using a coated abrasive belt. Use 3M™ Red Ribbed Back-up pad to optimize performance.
  • STEP TWO - SETTING THE GRAIN
    Create directional scratch using 3M™ Cubitron™ II Belt 947A, grade 120+. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
  • STEP THREE - FINAL FINISHING
    To blend final finish, use a Scotch-Brite™ Surface Conditioning Belt ACRS for a #3 finish and AMED for #4 finish. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
  • STEP FOUR
    Do final blending and touch-up with Scotch-Brite™ 7447 PRO hand pads.
 More...
Specifications
Attribute Name
Value
Application
Cleaning, Deburring, Finishing, Grinding, Polishing, Surface Preparation
Application Category
Adhesives, Adhesives, Coatings, Sealant Corrosion Removal, Blending/Deburring, Coatings, Finishing/Polishing, Grinding/Metal Stock Removal, Sealant Corrosion Removal
Attachment Type
Center Hole, Type 27
Back Color
Brown, Maroon
Backing Material
Cloth, Scrim
Backing Weight
Y Weight
Bonding Type
Resin
Brand
Cubitron™ II, Scotch-Brite™
Center Hole Diameter
0.875 in, 5 in
Center Hole Diameter (Metric)
127 mm, 22.225 mm
Center Hole Thread Size
5/8-11 INT
Color
Beige, Brown, Red, Brown, Maroon, Tan
Density
7
Density Rating
Hard
Disc Type
Type 27
Equipment - Machines
Centerless Grinders, File Belt Sanders, Inline Sanders, Manual Backstand, Pressure Assit Backstand, Right Angle Grinders
Form Type
Flap Brush, Right Angle, Scrim
For Use On
All Metals, Carbon Steel, Metal, Stainless Steel
Front Color
Brown, Maroon
Grade
Coarse, Medium, Very Fine
Grit
60+
Health and Safety
Hand Protection, Head and Face Protection, Hearing Protection, Respiratory Protection
Industries
General Industrial, Marine, Metalworking, MRO, Transportation & Heavy Equipment
Low Stretch
No
Maximum Speed
13300, 6500, 6500 Foot Per Minute
Max RPM
13300, 2500, 2700
Mineral Type
Aluminum Oxide, Precision Shaped Ceramic
Overall Diameter (Imperial)
12 in, 4.5 in
Overall Diameter (Metric)
114.3 mm, 304.8 mm, 114.3 mm, 304.8 mm
Overall Length (Imperial)
12 in, 15.5 in, 18 in, 21 in, 24 in, 30 in, 60 in, 75 in
Overall Length (Metric)
1524 mm, 1905 mm, 304.8 mm, 393.7 mm, 457.2 mm, 533.4 mm, 609.6 mm, 762 mm
Overall Width (Imperial)
0.25 in, 0.5 in, 1 in, 2 in, 3.5 in, 36 in, 37 in
Overall Width (Metric)
12.7 mm, 25.4 mm, 50.8 mm, 6.35 mm, 88.9 mm, 914.4 mm, 939.8 mm
Position
Better, Premium
Primary Application
Metalworking, Other Door Assembly Applications, Paint Prep, Coating & Corrosion Removal
Product Form
Belt, Brush, Disc
Product Series
967A
Sub Industries
Builders Hardware, Medical Instruments, Sub Applications, Metal Implants, Plumbing Fixtures, Turbine Engines
Substrate
All Metals, Carbon Steel, Stainless Steel
TDS Required
Yes
Wheel Type
Type 27
Product Details
  • STEP ONE - LEVEL THE WELD
    Remove the weld with 3M™ Cubitron™ II Fibre Disc 987C, grade 60+. Set the grain, using a coated abrasive belt. Use 3M™ Red Ribbed Back-up pad to optimize performance.
  • STEP TWO - SETTING THE GRAIN
    Create directional scratch using 3M™ Cubitron™ II Belt 947A, grade 120+. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
  • STEP THREE - FINAL FINISHING
    To blend final finish, use a Scotch-Brite™ Surface Conditioning Belt ACRS for a #3 finish and AMED for #4 finish. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
  • STEP FOUR
    Do final blending and touch-up with Scotch-Brite™ 7447 PRO hand pads.

Pass-through wide belt sanders are often used for processing metal sheet material to remove defects and protrusions and establish grain patterns.

Pass-through wide belt sanders are often used for processing metal sheet material to remove defects and protrusions and establish grain patterns.

Take a step toward improved productivity with the 3M™ Cloth Belt 777F featuring 3M Ceramic Abrasive Grain for long life and fast cut. This is an ideal belt for running on heat-sensitive metals like stainless steel.

Customer Reviews
3M™ Stainless Steel Finishing System is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Puts a razor edge on knives I saw a demonstration of a razor knife yesterday and managed to get some of the secrets of the guy's method out of him. He said the final step was to use a Scotch-Brite surface conditioning belt,and that's what led to this review.
Date published: 2019-04-27
  • y_2019, m_11, d_16, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_IBGABAPP00001|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 2ms
  • REVIEWS, PRODUCT
Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Send