3M™ Stainless Steel Finishing System

3M ID IBGABAPP00001

STEP ONE - LEVEL THE WELD
Remove the weld with 3M™ Cubitron™ II Fibre Disc 987C, grade 60+. Set the grain, using a coated abrasive belt. Use 3M™ Red Ribbed Back-up pad to optimize performance.
STEP TWO - SETTING THE GRAIN
Create directional scratch using 3M™ Cubitron™ II Belt 947A, grade 120+. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
STEP THREE - FINAL FINISHING
To blend final finish, use a Scotch-Brite™ Surface Conditioning Belt ACRS for a #3 finish and AMED for #4 finish. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
STEP FOUR
Do final blending and touch-up with Scotch-Brite™ 7447 PRO hand pads.

View all details

Specifications

Attribute Name	Value
Application	Cleaning, Deburring, Finishing, Grinding, Polishing, Surface Preparation
Application Category	Adhesives, Adhesives, Coatings, Sealant Corrosion Removal, Blending/Deburring, Coatings, Finishing/Polishing, Grinding/Metal Stock Removal, Sealant Corrosion Removal
Attachment Type	Center Hole, Type 27
Back Color	Brown, Maroon
Backing Material	Cloth, Scrim
Backing Weight	Y Weight
Bonding Type	Resin
Brand	Cubitron™ II, Scotch-Brite™
Center Hole Diameter	0.875 in, 5 in
Center Hole Diameter (Metric)	127 mm, 22.225 mm
Center Hole Thread Size	5/8-11 INT
Color	Beige, Brown, Red, Brown, Maroon, Tan
Density	7
Density Rating	Hard
Disc Type	Type 27
Equipment - Machines	Centerless Grinders, File Belt Sanders, Inline Sanders, Manual Backstand, Pressure Assit Backstand, Right Angle Grinders
Form Type	Flap Brush, Right Angle, Scrim
For Use On	All Metals, Carbon Steel, Metal, Stainless Steel
Front Color	Brown, Maroon
Grade	Coarse, Medium, Very Fine
Grit	60+
Health and Safety	Hand Protection, Head and Face Protection, Hearing Protection, Respiratory Protection
Industries	General Industrial, Marine, Metalworking, MRO, Transportation & Heavy Equipment
Low Stretch	No
Maximum Speed	13300, 6500, 6500 Foot Per Minute
Max RPM	13300, 2500, 2700
Mineral Type	Aluminum Oxide, Precision Shaped Ceramic
Overall Diameter (Imperial)	12 in, 4.5 in
Overall Diameter (Metric)	114.3 mm, 304.8 mm, 114.3 mm, 304.8 mm
Overall Length (Imperial)	12 in, 15.5 in, 18 in, 21 in, 24 in, 30 in, 60 in, 75 in
Overall Length (Metric)	1524 mm, 1905 mm, 304.8 mm, 393.7 mm, 457.2 mm, 533.4 mm, 609.6 mm, 762 mm
Overall Width (Imperial)	0.25 in, 0.5 in, 1 in, 2 in, 3.5 in, 36 in, 37 in
Overall Width (Metric)	12.7 mm, 25.4 mm, 50.8 mm, 6.35 mm, 88.9 mm, 914.4 mm, 939.8 mm
Position	Better, Premium
Primary Application	Metalworking, Other Door Assembly Applications, Paint Prep, Coating & Corrosion Removal
Product Form	Belt, Brush, Disc
Product Series	967A
Sub Industries	Builders Hardware, Medical Instruments, Sub Applications, Metal Implants, Plumbing Fixtures, Turbine Engines
Substrate	All Metals, Carbon Steel, Stainless Steel
TDS Required	Yes
Wheel Type	Type 27

Product Details

STEP ONE - LEVEL THE WELD
Remove the weld with 3M™ Cubitron™ II Fibre Disc 987C, grade 60+. Set the grain, using a coated abrasive belt. Use 3M™ Red Ribbed Back-up pad to optimize performance.
STEP TWO - SETTING THE GRAIN
Create directional scratch using 3M™ Cubitron™ II Belt 947A, grade 120+. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
STEP THREE - FINAL FINISHING
To blend final finish, use a Scotch-Brite™ Surface Conditioning Belt ACRS for a #3 finish and AMED for #4 finish. Recommend using a 3M™ Inline Sander and 3M™ Expander Wheel.
STEP FOUR
Do final blending and touch-up with Scotch-Brite™ 7447 PRO hand pads.

Pass-through wide belt sanders are often used for processing metal sheet material to remove defects and protrusions and establish grain patterns.

Pass-through wide belt sanders are often used for processing metal sheet material to remove defects and protrusions and establish grain patterns.

Take a step toward improved productivity with the 3M™ Cloth Belt 777F featuring 3M Ceramic Abrasive Grain for long life and fast cut. This is an ideal belt for running on heat-sensitive metals like stainless steel.

Resources

Brochures

2019 Stainless Steel Finishing Brochure - Low Res (PDF, 1.0MB)

Customer Reviews

3M™ Stainless Steel Finishing System is rated 5.0 out of 5 by 1.

Rated 5 out of 5 by Fig Newton from Puts a razor edge on knives I saw a demonstration of a razor knife yesterday and managed to get some of the secrets of the guy's method out of him. He said the final step was to use a Scotch-Brite surface conditioning belt,and that's what led to this review.

Date published: 2019-04-27

Large Volume Order

If you are considering a large purchase of this or other 3M Abrasive products our inside sales team is ready to help by providing additional information and options that our industrial customers typically seek when making abrasive procurement decisions. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your abrasive supplier of choice.

All fields are required unless indicated optional

*First Name
*Last Name
*Company
*Company Address
*Contact Phone
*Email Address
*Country/Region
*City
State/Province
*Zip Code
*Number of Abrasive Discs or Wheels You Plan to Purchase
*Total Number of Operators in your shop
Subscribe to our mailing list
3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.
Send

3M United States

The brands listed above are trademarks of 3M.

Change Location
United States - English

Legal|Privacy|DMCA