- Low viscosity formulation
- Dispenses with a Duo-Pak cartridge system
- Cures extremely quickly
- Bonds to many plastics, wood, composites, concrete and metal
3M™ Scotch-Weld™ Urethane Adhesive DP601NS is a quick-curing, two-component, non-sag polyurethane adhesive designed for bonding dissimilar materials with extremely fast set times. The rapid setting formulation has handling strength in four minutes for rapid bonding. Full cure in one hour.
Easy to use — Just clean damaged area and fill
Hardens to any depth without cracking or shrinking
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment
(PDF, 1.88 Mb) for convenient and accurate metering, mixing and dispensing.
Self-Leveling and Rapid-Setting Adhesive
3M™ Scotch-Weld™ Urethane Adhesive DP601NS is a two-component polyurethane that is formulated to be rapid-setting, providing fast, strong bonds. This urethane adhesive has a 1:1 mix ratio and sets in approximately 4 minutes, with full cure in 1 hour. It is self-leveling and delivers a clean and smooth final result. 3M™ Scotch-Weld™ Urethane Adhesive DP601NS
(PDF, 570.3 Kb) is tough and non-brittle for long-term durability. This product is capable of bonding dissimilar substrates, such as some plastics, concrete, wood and metal.
Dispenses Duo-Pak Cartridge System
- Bonding of plastic to concrete, metal or wood
- Bumper repair
- Bonding reflectors to concrete or asphalt
3M™ Scotch-Weld™ Urethane Adhesive DP601NS is a two-part component system. The Duo-Pak cartridge keeps the components separate until ready for mixing to maximize working time. With the squeeze of a trigger the components are automatically mixed with the innovative mixing nozzle and easily dispensed precisely where needed without an unwanted mess. The bubble-free liquid begins curing immediately while also self-leveling to create a tough, non-brittle bond. The fast curing formula provides a one minute work life.
Understanding Urethane Adhesives
Two part urethane adhesives
(PDF, 1.36 Mb) cure chemically, rather than relying on moisture from the air. Because of this, they can cure quickly with no depth of cure issues in contrast to one-part urethane adhesive sealants. Urethane adhesives will bond most common materials such as wood, metals, rubbers, leather, tile and glass, many plastics, concrete and more.
The versatility of urethane adhesives is exhibited in the different formulations that have varying cured properties such as different levels of stiffness or flexibility, open time and cure speed, and hardness. They can cure to a relatively rigid or highly flexible state to meet a wide range of requirements. In either finished state, urethane adhesives will maintain bond strength integrity through variable environmental factors such as temperature, moisture and chemical exposure.
Click here for more information on 3M Structural Adhesives.
(PDF, 15.87 Mb)