1. All 3M Products
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010

    3M Product Number 8010
    Products
    • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
    • Resists many chemicals, water, humidity and corrosion
    • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
    • Medium viscosity allows controlled dispensing
     More...
    Volume
    Products Available
    Available options:
     Volume
    All Options
    Close
    Specifications
    Attribute Name
    Value
    Adhesive Type
    Acrylic
    Application
    Bonding Composite Materials, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Sealing, Potting and Encapsulating, Small Joint Assembly
    Brand
    Scotch-Weld™
    Color
    Blue, Blue
    Design Challenges
    Noise Vibration & Harshness Control NVH
    Full Cure Time
    8-24 Hours @ 72 F (22 C)
    Hardness
    55-60 Shore D
    Indoor/Outdoor
    Both
    Industries
    Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
    Maximum Operating Temperature (Celsius)
    66 Degree Celsius
    Maximum Operating Temperature (Fahrenheit)
    250 Degree Fahrenheit
    Mix Ratio Volume Base:Accelerator
    10 : 1
    Open Time
    10 Minute, 10 minutes @ 72 F (22 C)
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Form
    Cartridge, Gallon, Pail
    Product Type
    Structural Plastic Adhesive
    Set Time
    60 Minute
    Shear Strength
    2700 Pound-Force Per Square Inch
    Shelf Life in Months (From Date of Manufacture)
    12, 6
    Specific Gravity
    0.95-1.05, 1.01, 1.06
    Storage Temperature
    40 F (4.5 C), <= 40 Degree Fahrenheit (4.5 DegreeCelsius), <=40 Degree Fahrenheit
    Substrate
    Ceramic, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Metal (Painted), Metal (Unpainted), Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Plastics: LSE (Polypropylene, Polyethylene), Smooth, Stone, Wood, Wood & Hardboard
    Substrate 1
    Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
    Substrate 2
    Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
    Viscosity
    Self-Leveling
    Viscosity Range (cps) at Room Temperature
    17,000-40,000, 20,000, 27,000
    Volatile Organic Compounds (VOCs)
    See Safety Data Sheet, Regulatory Data Sheet
    Volume
    1 gal, 1.58 Fluid Ounce, 17.24 Fluid Ounce, 5 gal
    Volume (Metric)
    19 L, 20 L, 45 ml, 490 ml
    Work Time
    8 Minutes
    Details
    • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
    • Resists many chemicals, water, humidity and corrosion
    • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
    • Medium viscosity allows controlled dispensing
    • 10 minute work life with 60 minute handling strength
    • Strong adhesive can replace screws, rivets and welding

    3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

    3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue
    Available in a range of sizes to meet application requirements
    When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

    Creates a Strong Bond on Low Surface Energy Plastics
    Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

    Recommended Applications
    • Joining plastics to metals, such as in the manufacture or repair of appliances
    • Bonding low surface energy plastics without priming
    • Impact resistance composite bonding
    • Manufacture or repair of various sporting goods equipment
    • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
    Our 3M™ Scotch-Weld™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).

    Easy Adhesion with Acrylic
    Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

    Customer Reviews
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 27ms
    • REVIEWS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;
    Large Volume Order

    If you are considering a large purchase of this or other 3M Industrial Adhesives and Tape products, our inside sales team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we'll do our best to prove that we should be your supplier of choice.


    All fields are required unless indicated optional

    • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

      Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

    • Submit