1. All 3M Products

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010

3M Product Number 8010
Products
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
 More...
Color
Volume
Volume (Metric)
Product Form
Products Available
Available options:
 Color, Volume, Volume (Metric) and Product Form
All Options
Close
Typical Properties
Attribute Name
Value
Adhesive Type
Acrylic
Application
Bonding Composite Materials, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Sealing, Potting and Encapsulating, Small Joint Assembly
Brand
3M™, Scotch-Weld™
Color
Blue
Design Challenges
Noise Vibration & Harshness Control NVH
Full Cure Time
8-24 Hours @ 72 F (22 C)
Hardness
55-60 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
66 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
250 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator
10 : 1
Open Time
10 Minute, 10 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge, Gallon, Pail
Product Type
Structural Plastic Adhesive
Set Time
60 Minute
Shear Strength
2700 Pound-Force Per Square Inch
Shelf Life in Months (From Date of Manufacture)
12, 6
Specific Gravity
0.95-1.05, 1.01, 1.06
Storage Temperature
40 F (4.5 C), <= 40 Degree Fahrenheit (4.5 DegreeCelsius), <=40 Degree Fahrenheit
Substrate
Ceramic, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Metal (Painted), Metal (Unpainted), Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Plastics: LSE (Polypropylene, Polyethylene), Smooth, Stone, Wood, Wood & Hardboard
Substrate 1
Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
Substrate 2
Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
Units per Case
1, 12, 6
Viscosity
Self-Leveling
Viscosity Range (cps) at Room Temperature
17,000-40,000, 20,000, 27,000
Volatile Organic Compounds (VOCs)
See Safety Data Sheet, Regulatory Data Sheet
Volume
1 gal, 1.58 Fluid Ounce, 17.24 Fluid Ounce, 5 gal
Volume (Metric)
19 L, 20 L, 45 ml, 490 ml
Work Time
8 Minutes
Details
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
  • 10 minute work life with 60 minute handling strength
  • Strong adhesive can replace screws, rivets and welding

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue
Available in a range of sizes to meet application requirements
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications
  • Joining plastics to metals, such as in the manufacture or repair of appliances
  • Bonding low surface energy plastics without priming
  • Impact resistance composite bonding
  • Manufacture or repair of various sporting goods equipment
  • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
Our 3M™ Scotch-Weld™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 16ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a large purchase of this or other 3M Industrial Adhesives and Tape products, our inside sales team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we'll do our best to prove that we should be your supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Submit