1. All 3M Products
  • 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810
  • 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810

    3M Product Number 810
    10  Products
    • Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
    • Provides high shear and peel strength and is toughened for impact resistance
    • 10 minute work life and 20 minute handling strength
    • Bonds oily metals with minimal surface prep
     More...
    Volume
    10 Products Available
    Available options:
     Volume
    All Options
    Close
    Specifications
    Attribute Name
    Value
    Adhesion Strength
    480 oz/in
    Adhesive Type
    Acrylic
    Application
    Bonding Composite Materials
    Brand
    Scotch-Weld™
    Color
    Beige, Black, Black, Tan
    Consumer Label
    No
    Design Challenges
    Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
    Full Cure Time
    8-24 Hours @ 72 F (22 C)
    Indoor/Outdoor
    Both
    Industries
    Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military & Government, Signage, Specialty Vehicle, Transportation, Woodworking
    Maximum Operating Temperature (Celsius)
    79 Degree Celsius
    Maximum Operating Temperature (Fahrenheit)
    175 Degree Fahrenheit
    Mix Ratio Volume Base:Accelerator
    1 : 1
    Net Weight
    17.4
    Open Time
    10 minutes @ 72 F (22 C)
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Form
    Each, Gallon, Liter
    Product Type
    Acrylic Adhesive
    Set Time
    10 Minute
    Shear Strength
    3600 Pound-Force Per Square Inch
    Shelf Life in Months (From Date of Manufacture)
    12
    Specific Gravity
    1.07
    Storage Temperature
    32 F (0 C), <=40 Degree Fahrenheit
    Substrate
    Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Smooth, Wood, Wood & Hardboard
    Substrate 1
    Epoxy - Fiber Reinforced, Glass & Ceramics, Metal, Nylon - Fiber Reinforced, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
    Substrate 2
    Epoxy - Fiber Reinforced, Glass & Ceramics, Metal, Nylon - Fiber Reinforced, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Thermosets - Fiber Reinforced, Wood & Hardboard
    Viscosity
    Self-Leveling
    Viscosity Range (cps) at Room Temperature
    17,000-21,000, 18,000-22,000, 20,000
    Volatile Organic Compounds (VOCs)
    See Safety Data Sheet, Regulatory Data Sheet
    Volume
    1 gal, 1.71 Fluid Ounce, 13.52 Fluid Ounce, 4.4 gal, 6.76 Fluid Ounce
    Volume (Metric)
    20 L, 200 ml, 400 ml, 48.5 ml
    Work Time
    10 Minutes
    Details
    • Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
    • Provides high shear and peel strength and is toughened for impact resistance
    • 10 minute work life and 20 minute handling strength
    • Bonds oily metals with minimal surface prep
    • Bonds most plastics, composites and metals

    3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.

    When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

    Provides High Shear and Peel Strength and is Toughened for Impact Resistance
    This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.

    Recommended Applications

    • Sporting goods (metal to metal, metal to plastic bonding)
    • Appliance manufacturing (metal to metal, metal to glass)
    • Electronic casing assembly
    10 Minute Work Life and 20 Minute Handling Strength
    With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.

    Easy Adhesion with Acrylic
    Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

    This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications.
    Stress Strain curve and material properties for 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810

    Customer Reviews
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 72ms
    • REVIEWS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;
    Large Volume Order

    If you are considering a large purchase of this or other 3M Industrial Adhesives and Tape products, our inside sales team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we'll do our best to prove that we should be your supplier of choice.


    All fields are required unless indicated optional

    • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

      Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

    • Submit