1. 3M United States
  2. All 3M Products

3M™ Sandblast Stencil 1532T

3M Product Number 1532T
Products
  • Cuts evenly and easily, with clean, visible cut-marks which makes it ideal for hand-cutting
  • Excellent choice for intricate designs and detailing
  • Provides superb blast resistance against a variety of blasting media including aluminum oxide grit, shot peen, glass bead, and plastic media
  • Outstanding adhesion and protection to granite, marble, other stone surfaces, glass, wood and various metals
 More...
View all details
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
Products Available
Available options:
 Overall Width (Imperial) and Overall Width (Metric)
All Options
  • Overall Length (Imperial)
    Overall Length (Metric)
    Overall Width (Imperial)
    Overall Width (Metric)
    Product Color
  • 3M™ Sandblast Stencil 1532T, Green, 30 in x 10 yd, 35 mil, 1 roll per case, Tractor Feed
    Overall Length (Imperial)
    10 yd
    Overall Length (Metric)
    9.14 m
    Overall Width (Imperial)
    30 in
    Overall Width (Metric)
    762 mm
    Product Color
    Green
  • 3M™ Sandblast Stencil 1532T, Green, 15 in x 10 yd, 35 mil, 1 roll per case, Tractor Feed
    Overall Length (Imperial)
    10 yd
    Overall Length (Metric)
    9.14 m
    Overall Width (Imperial)
    15 in
    Overall Width (Metric)
    381 mm
    Product Color
    Green
Close
Details
  • Cuts evenly and easily, with clean, visible cut-marks which makes it ideal for hand-cutting
  • Excellent choice for intricate designs and detailing
  • Provides superb blast resistance against a variety of blasting media including aluminum oxide grit, shot peen, glass bead, and plastic media
  • Outstanding adhesion and protection to granite, marble, other stone surfaces, glass, wood and various metals
  • High-release polyester liner helps eliminate liner separation during the commercial plotting process
  • Used in tractor fed application methods

3M™ Sandblast Stencil 1532T is a green rubber sandblast stencil featuring a clear polyester liner for use in a variety of sandblasting protection applications. It is conformable, and a superb choice for intricate designs. This stencil features very high adhesion for single liner sandblast products. This stencil product is ideal for tractor fed operations.

A roll of green, thick rubber sandblast stencil
3M sandblast stencil 1532T is a tractor fed format compatible with IBM plotters
Ideal Solutions for Detail Orientated Sandblasting and Stenciling
3M™ Sandblast Stencil 1532T (PDF, 10.8 Kb) is a thick rubber sandblast stencil with a rubber adhesive. It is designed for a variety of blasting protection applications. This stencil is the thinnest of the portfolio, providing outstanding conformability. It also provides excellent blast resistance, making it ideal for protecting sensitive substrates such as granite, marble, other stone surfaces, glass, wood and various metals. This stencil cuts evenly and easily, with clean, visible cut-marks which makes it ideal for tractor fed operations. The green colored backing assists in identifying the stencil, an important aspect when dealing with fine detail work. A high-release, polyester liner helps eliminate liner separation during the commercial plotting process and aids in the ease of use and application.

Recommended Applications
  • Direct protection against blasting media including aluminum oxide grit, shot peen, glass bead, and plastic media
  • Overspray and edge protection
  • Protects surfaces during glass etchings and carving applications
  • Small letter stencil designs

Helpful Tips for Sandblasting Success
The stone surface should be clean, dry and at a room temperature of 50° to 85°F (10° to 29°C) before applying the filler. Brush the well mixed filler evenly onto the stone surface. Let dry in a well-ventilated area until the "gloss" on the surface has disappeared. Then apply the stencil according to directions. After blasting, remove the stencil as soon as possible. If any cleanup is necessary, use stencil scraps or masking tape to pull leftover filler from the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and to hold the stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 for rough and irregular surfaces.

Smart Solutions through Science and Innovation
The 3M Industrial Adhesives and Tapes Division is changing the way companies around the world mask, protect, splice, color code and stop moisture. These technologies help customers deliver competitive products to the market with speed and efficiency. The 3M™ Sandblast Stencil Splice Free 1532T is just one example of how 3M is bringing better ideas to the surface through science and innovation.

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 51ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Large Volume Order

If you are considering a purchase of this or other 3M Industrial Adhesives and Tape products, our team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we'll do our best to prove that we should be your supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Submit