1. All 3M Products
  • 3M™ Rubberized Undercoating
  • 3M™ Rubberized Undercoating

    Part Number 088833M ID 60455051155UPC 00051131088832
    • Multi-purpose undercoating may be applied to cars, truck and recreational vehicles
    • Sound deadening properties help reduce road noise
    • Anti-corrosive coating protects the undercarriage of vehicles from rust and abrasion
    • Aerosol dispenser allows for easy spray-on application
     More...
    Specifications
    Attribute Name
    Value
    Application
    Corrosion Barrier Coating, Undercoating
    Brand
    3M™
    Case Quantity
    6 Cans per Case
    Consistency
    Aerosol
    Consumer Label
    Yes
    Container Size (Imperial)
    19.7 Ounce
    Dry Time
    30 MINUTES
    Number per Inner
    1 per Can
    Product Color
    Black
    Product Type
    Rubberized Undercoat
    Texture
    Medium
    Weight (Metric)
    560 g
    Details
    • Multi-purpose undercoating may be applied to cars, truck and recreational vehicles
    • Sound deadening properties help reduce road noise
    • Anti-corrosive coating protects the undercarriage of vehicles from rust and abrasion
    • Aerosol dispenser allows for easy spray-on application

    3M™ Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. Provides one-coat build-up with no dripping, running or sagging.

    3M™ Rubberized Undercoating
    Excellent corrosion and abrasion resistance
    Protect the Underside of Your Vehicle from Corrosion
    3M™ Rubberized Undercoating helps protect the undercarriage of cars, trucks, vans and recreational vehicles from both corrosion and abrasion. The coating may also be used to protect wheel wells, quarter panels, interior side of fenders, door skins, under side of the hood and trunk lid, floor pans, and more. The rubberized undercoating also helps deaden noise, allowing for a more pleasant and quieter ride. The spray goes on as a textured black finish that resists chipping, abrasion, exterior rusting, and weathering. It provides one-coat build-up with no dripping, running, or sagging. Protecting your vehicle with an application of rubberized undercoating is advised for long-term protection of the undercarriage. Rubberized undercoating creates a protective barrier that seals out grit, grime and moisture that could otherwise corrode the metal components. This extra protection is a low-cost measure that can pay off by potentially extending the service life of a vehicle.

    Enjoy a More Pleasant Ride
    For a quieter ride, rubberized undercoating helps insulate the vehicle cabin from noise, including road, engine, and wind noises. When soundproofing an automobile, consider the most common source of the noise for your situation. Cars of all makes, models and price ranges will benefit from noise reduction soundproofing.

    An Appealing Appearance
    The undercoating goes on with a medium to coarse texture that matches OEM standards. It's easy to achieve a consistent coating appearance that looks professional and meets quality standards. The durability of the coating means it will maintain its protective qualities and visual appeal over time.

    Exceptional Convenience
    The aerosol can offers exceptional convenience for applying the undercoating without any additional investment in equipment.

    Directions for Use
    1. Remove all rust scale, oil and grease from surfaces to be coated. Surface must be clean and dry.
    2. May be applied to bare or primed metal.
    3. Note: If applying to composite plastic (SMC/FRP) as a sound deadening material, sand the composite plastic surface with a medium grade abrasive prior to applying under coating, this will increase adhesion.
    4. Shake can for at least 60 seconds after agitator ball moves freely. To assure that the entire contents will be dispensed, always have the dot on the can rim facing downward.
    5. Hold the can 10 - 12 inches from the surface and apply a uniform coat. Allow product to dry 3 - 5 minutes, then apply a second coat. For hard to reach or small areas, use the snorkel tube with spray head.
    6. After use clear valve by inverting can and spray until free of material.
    7. Note: Car trunks and interior areas require special attention to remove the vapors.
    See the 3M Coatings Application Guide in the Automotive Aftermarket Products & Systems Catalog for more information (PDF, 4.7 Mb)

    Customer Reviews
    3M™ Rubberized Undercoating is rated 5.0 out of 5 by 2.
    Rated 5 out of 5 by from Good Quality ! Cost Effective I have used this 3M undercoating for my Honda City 2003 SX8, I must say its amazing product and safe to get the Rust again, Very good finishing and dry quickly. After some days i feel my car soundless. very good Product. i used 5 cans for Sedan car
    Date published: 2018-11-04
    Rated 5 out of 5 by from Better then any other undercoating I have tryed Applied to my 2003 cummins alot of surface to cover ,went on smooth and with just one coat
    Date published: 2017-09-17
    • y_2020, m_7, d_5, h_15
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_2
    • loc_en_US, sid_B40071582|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_3m-country-catalog
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 49ms
    • REVIEWS, PRODUCT
    Product Support

    Specific product and application questions

    SEND US A MESSAGE

    Message Us

    We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

    All fields are required unless indicated optional.

    • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

      Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English