1. All 3M Products
  • 3M™ QS-II Molded Rubber Inline Splice Kit 5423, CN and JCN, 25/28 kV, 250-350 kcmil, 1.120-1.320 in, 1 per case
  • 3M™ QS-II Molded Rubber Inline Splice Kit 5423, CN and JCN, 25/28 kV, 250-350 kcmil, 1.120-1.320 in, 1 per case

    Part Number 54233M ID 80610024152UPC 00054007158431
    • 3-piece inline splice to use on jacketed concentric neutral (JCN) or concentric neutral (CN) cables
    • Excellent electrical stress distribution
    • Designed for direct burial, aerial and submersible applications
    • Cable has 1.12 to 1.32-in insulation O.D.
     More...
    View Legal Disclaimer
    Specifications
    Attribute Name
    Value
    Cable Shielding
    Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
    Case Quantity
    1
    Color
    Black, Black
    Conductor Size Range
    250-350 kcmil
    Conductor Sizes
    250 kcmil, 350 kcmil
    Connector Included
    None
    Dielectric Strength (V/mil)
    490 V/mil
    Elongation
    635 %
    For Use With
    3M™ 5400 Series Cold Shrink Splices
    Insulation O.D. Range
    1.120 - 1.320 Inch
    Insulation Outside Diameter Range
    1.120 - 1.320 Inch
    Insulation Outside Diameter Range (Metric)
    28.4 - 33.5 mm
    Maximum Cable Jacket Opening
    31 Inch
    Minimum Cable Jacket O.D.
    1.15 in
    Number of Conductors
    1
    Product Series
    5420 Series
    Product Technology
    Molded Rubber
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Undetermined
    RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
    Splice Type
    Inline
    Details
    • 3-piece inline splice to use on jacketed concentric neutral (JCN) or concentric neutral (CN) cables
    • Excellent electrical stress distribution
    • Designed for direct burial, aerial and submersible applications
    • Cable has 1.12 to 1.32-in insulation O.D.
    • Accommodates 250 to 350 kcmil size conductor
    • Molded from specially formulated, peroxide-cured EPDM rubbers
    • Rated for 25/28 kV cables
    • Production-tested to offer reliability
    • Meets the requirements of IEEE 404 standards for cable joints

    3M™ 5420 Series Molded Rubber QS-II Splice Kit is a 3-piece inline splice designed to use on 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. A versatile design handles cables with a wide range of sizes and diameters. It is perfect for indoor and outdoor usage including direct burial, aerial and submersible applications.

    3M™ 5420 Series Molded Rubber QS-II Splice Kit includes 2 molded conductive rubber end caps, 2 packets of silicone grease, a vinyl tape roll and an instruction sheet. It is suitable to use on cables that can withstand a maximum temperature of 90 degrees C. The splice is molded from specially formulated, peroxide-cured EPDM rubbers. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate. The jacketing kit is needed for JCN cable. The kit meets the requirements of IEEE 404 standards for cable joints.

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English