1. 3M United States
  2. All 3M Products
  • 3M™ Particulate Respirator 8210, N95 160 EA/Case
  • 3M™ Particulate Respirator 8210, N95 160 EA/Case

    3M Product Number 82103M ID 70070614394UPC 50051138464573
    • NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
    • Two-strap design with welded dual point attachment helps provide a secure seal
    • Cushioning nose foam
    • Lightweight construction promotes greater worker acceptance and may help increase wear time
     More...
    View all details

    Alert: Coronavirus Pandemic

    3M is focused on working with the government and authorized distributors to supply PPE to healthcare providers, first responders, and other essential workers, including providing support to industrial customers as the economy continues to open.


    Get Information and respiratory guidance
    Specifications
    Attribute Name
    Value
    Aerosol Type
    Non-Oil
    Boxes per Case
    8
    Brand
    3M™
    Case Quantity
    160
    Class
    Comfort
    Exhalation Valve
    No
    FDA Cleared
    No
    Features
    Advanced Electrostatic Media
    Flame Resistance (ASTM D2859-96)
    No
    Fluid Resistant (ASTM F1862)
    N/A
    Natural Rubber Latex Components
    No
    Number per Box
    20
    Packaging
    Bulk Case
    Product Color
    White
    Product Type
    Dust and other Particles
    Protection Level
    APF = 10
    Recommended Industry
    Commercial Buildings, Construction, Design & Construction, Food Processing, Food Safety, General Manufacturing, Heavy Infrastructure, Mining, Oil & Gas, Transportation
    Respirator Style
    Cup
    Size
    Standard
    Standards/Approvals
    N95
    Details
    • NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
    • Two-strap design with welded dual point attachment helps provide a secure seal
    • Cushioning nose foam
    • Lightweight construction promotes greater worker acceptance and may help increase wear time
    • Lightweight construction promotes greater worker acceptance and may help increase wear time
    • Advanced electrostatic media is designed for ease of breathing

    During the public health emergency of the COVID-19 pandemic, these standard N95 “industrial” respirators may be used by healthcare professionals according to the U.S. FDA’s Emergency Use Authorization (EUA). 3M™ Particulate Respirator 8210 is not cleared by the U.S. FDA as a surgical mask, as a surgical mask and is not considered fluid resistant, therefore a face shield must be worn during use.

    3M Particulate Respirator 8210, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. This respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection.

    This particulate respirator is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain non-oil based particles and provides at least 95 percent filter efficiency.

    Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Respirator 8210, which is designed to help reduce exposure to certain airborne particles.

    WARNING: These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see package instructions, supervisor, or call 3M OH&ESD Technical Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.

    Related Items
    Related Products
    Customer Reviews
    3M™ Particulate Respirator 8210, N95 160 EA/Case is rated 3.2 out of 5 by 11.
    Rated 3 out of 5 by from Weak Straps! I have purchased 3m N95s before and I would normally rate them as 5. But I am disappointed in this recent version. The straps are made of inferior grade materials and break easily while putting them on. In the past, for light usage tasks, I had been able to reuse the mask multiple times. This mask was only worn a few times and a strap broke. I reattached it, and it instantly broke again.
    Date published: 2021-03-09
    Rated 5 out of 5 by from Normal N95 I work in a factory where we do a lot of machining, polishing, and grinding. I've worn these masks or other 3M N95 masks for 8 hours a day, for a few years now. I can usually get a week out of them before the strap breaks, but that is more than enough time since they are pretty dirty by then. This is accomplished by stretching the straps before use. The straps are tight for the first day, but stretch out as you wear it and it becomes more comfortable. It seals tight around my face and is comfortable around my nose. The breathability is good and as the mask gets brown and dirty, the inside stays perfectly clean as it should. Only downsides are they are a little tough, but not impossible, to wear with safety glasses and during the summer when its hot, it's a little uncomfortable- not unlike most masks. In the summer I prefer to wear the 8210V that features an exhalation valve for better cooling and exhaling. I also found the 9010 fold type mask allows for easier usage of glasses due to its design. I rate all 3 masks 5 stars.
    Date published: 2021-03-07
    Rated 1 out of 5 by from Non-functional Straps pull out immediately, rendering product useless.
    Date published: 2021-03-04
    Rated 1 out of 5 by from Not a quality product Like others, I found the top strap snapped immediately when stretched. I also thought it might be counterfeit but the lot numbers checked out. I understand that one is supposed to pre-stretch the straps but it's easy to forget when trying to meet patient needs quickly in a clinic setting. Not the quality I expect from 3M.
    Date published: 2021-02-17
    Rated 1 out of 5 by from very uncomfortable This mask is so tight. Im not a big guy...6'3'' and 220 lbs. The straps usually break when putting over my head and once on tight around my head. Why not make larger sizes??? I work in healthcare and this is the only mask we are allowed to use.
    Date published: 2021-02-08
    Rated 4 out of 5 by from Easier to breathe and talk Easy to breathe and talk. Fits very snug and if you pinch nose piece helps end fogged glasses. Elastic broke third wear. 3M- Do these help protect from covid?
    Date published: 2021-02-07
    Rated 1 out of 5 by from poor straps I bought these masks in Sept. The strap broke when I put it on. I checked the lot and products numbers on3M fraud site numbers were legitimate. When I placed the order I thought I was ordering the 8210 plus with the braided elastic straps. The distributor just told me that 3M is no longer making the N95 8210 plus masks is this true? I'm unable to add a photo.
    Date published: 2021-01-24
    Rated 4 out of 5 by from watch for particles inside the mask I bought a box of these masks several years ago, in consideration of smoke from California wildfires infiltrating the Bay Area. So that should put the purchase well before counterfeits were on the market. The masks work fine as far as I can tell, for filtration purposes. There is a lot of humid air that wafts up and fogs my glasses even when they are properly fitted as far as I can tell; I don't know that I would disqualify the masks for use on that account, though. There is a strip of gray foam material on the inside top; I'm not exactly sure what the design purpose is. However, now when I wear the masks, that material crumbles during first use, and turns into black particles which you breathe in. Net effect, if you sneeze into a clean white tissue after wearing a fresh mask for an hour, you will eject a lot of such particles. That can't be good. I clean them out of the mask with some scotch tape for re-wearing, and it's fine. Perhaps I should be crushing and removing that gray foam before first wearing, to avoid this issue. Regardless, I think this is something that 3M should be looking into, as regards the safety of the mask itself.
    Date published: 2021-01-16
    • y_2021, m_4, d_11, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_11
    • loc_en_US, sid_70070614394|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_3m-country-catalog
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 3ms
    • REVIEWS, PRODUCT