- A high performance two-part epoxy adhesive gives excellent adhesion to a variety of substrates
- Bonds outer body panels to reduce welding and riveting time
- Corrosion inhibiting formula protects work for long-lasting results
- Has excellent shelf life opened or unopened, reducing unused product replacement costs
- Can be spot welded through or used in conjunction with rivets for added reinforcement
- Heat accelerated curing affords long work times and reduces cycle time
Our 3M™ Panel Bonding Adhesive is a cost-effective two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation.
3M Panel Bonding Adhesive provides a continuous bond and seals weld and rivet bonded areas against corrosions
The result of years of development and testing, our 3M™ Panel Bonding Adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP (traditional fiberglass). It is ideal for bonding quarter panels, roofs skins, box sides, van sides, utility vehicle sides and door skins — anywhere that requires a lasting bond for outer body panels - as specified by OEM. Many interior or other adjacent parts that must be removed to avoid damage from welding can remain installed when bonding.
Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.
See Standard Operating Procedures for Aluminum Body Repair
(PDF, 3.09 Mb)
Two-part panel bonding adhesive is available from 3M in cartridges from 50 mL to 400 mL, and works seamlessly with 3M manual applicator guns such as 08117
and the 3M pneumatic applicator gun 09930
for the 200ml cartridges. It applies quickly from the cartridge with no pre-mixing or measuring. The adhesive contains glass beads which reduces excessive squeeze-out and makes it easy to form consistent bondlines. A work time of up to two hours and the added heat-assisted on-demand curing allows for accurate application, squeeze-out sealing and cleanup. The bonding adhesive also has an excellent shelf life even after it's been opened, reducing the cost of replacing unused product.
Better Science for Better Bonding from 3M
3M™ Panel Bonding Adhesive is the result of years of laboratory development and field testing. Our scientists pioneered "bondline control" in the collision repair market, incorporating glass beads into our adhesive formula that work as built-in spacers for optimal bond line thicknesses. Our adhesive cartridges, together with our manual and pneumatic applicator guns and mixing nozzles, form a system that eliminates pre-mixing or measuring of two-part epoxies. The ability to bond effectively results in a more versatile, cost-effective shop.
Learn More about 3M™ Panel Bonding Adhesive
(PDF, 5.85 Mb)