1. All 3M Products

3M™ PPS™ Series 2.0 Spray Cup System Kit

10  Products
  • 3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system
  • New quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading
  • Redesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications
  • Domed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter
 More...
Volume
Volume (metric)
Cup Size
10 Products Available
Available options:
 Volume, Volume (metric) and Cup Size
All Options
Close
Specifications
Attribute Name
Value
Brand
PPS™
Case Quantity
1 Bags per Case
Cup Size
Large, Micro, Midi, Mini, Standard
Number per Inner
1 per bag
Volume
13.5 Fluid Ounce, 22 Fluid Ounce, 28 Fluid Ounce, 3 Fluid Ounce, 6.8 Fluid Ounce
Volume (metric)
200 ml, 400 ml, 650 ml, 850 ml, 90 ml
Details
  • 3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system
  • New quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading
  • Redesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications
  • Domed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter
  • Full-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow
  • A new reusable hard cup is included in every lid/liner kit
  • Mixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting/refilling easier
  • Enlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use
  • 3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0
  • 3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems

3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. Each lid and liner kit contains 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs.

The Heart of 3M™ PPS™ Series 2.0
3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. 

Next Generation of the 3M™ PPS™ Paint Preparation System
The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.

Cleanest Disposable Cup System
Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.

Reduce Material Waste by Mixing in the Cup
3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.

Improved Fluid Flow for More Consistent Paint Application
Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.

More Confidence in the Connection to Your Gun
A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.

A System for Both Solvent-Based and Waterborne Products
Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.

Use the Right Size Cup for Every Repair
Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.

Reduce Solvent Usage by up to 70%
After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.

Your Spray Gun Functions at any Angle, Even Upside Down
Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. 

The Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice
3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.

Resources
Customer Reviews
3M™ PPS™ Series 2.0 Spray Cup System Kit is rated 1.7 out of 5 by 3.
Rated 1 out of 5 by from Liners splitting out I work for a plastics sign manufacturer. We got this system about 8 years ago. This was a great system. I could use a liner over and over all week using the same color. I sometimes paint up to 20 different colors a day. Last May I noticed my liners splitting out. There are times when I have to use multiple liners to spray 1 color. Sometimes I only get 2 or 3 passes and they split out. 3m is trying to say it is only us having this issue. Yeah right. So I have been struggling with this issue for over a year. Last week I was told I could only use 20 psi when spraying. ???. I have been spraying 45psi through this system since we got it. I feel like 3m is doing nothing to fix this issue. It has been over a year! Oh yeah, except to blame me.
Date published: 2018-06-09
Rated 2 out of 5 by from PPS cup liner's small split after initial drawing I been using this setup for some time now. Works great when it does, however I have been experiencing some issues with the cup not holding the air out. When I remove the air and paint my firs coat, come back 10 minutes later and the cup is full of air, I can still spray, but pain leaking out in hard cup. I purchased off Amazon, 1600 cup size. It does not matter if its primer to clear coat, they all split, see picture. Not sure whats happening, cant find anything online. les
Date published: 2018-05-16
Rated 2 out of 5 by from thin lids, and cups when you try to put the cup on the shaker to shake up your paint, you really dont want too put too much pressure on the lid side of the cup. Stay neer your shaker, because your paint will be launched from your shaker, if you don' watch out for it.I hope there is a retainer for the cup so that I can position it on to my shaker, some day.
Date published: 2018-02-10
  • y_2018, m_12, d_9, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_B40072444|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 60ms
  • REVIEWS, PRODUCT
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English