1. All 3M Products

3M™ PPS™ Midi Lid & Liner Kit

3M ID B40069943
  • Designed for use with 3M™ Paint Preparation System, PPS™
  • Kit contains disposable Midi size disposable lids with micron filters, liners and sealing plugs
  • PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
  • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
 More...
Specifications
Attribute Name
Value
Applications
Paint Application
Details
  • Designed for use with 3M™ Paint Preparation System, PPS™
  • Kit contains disposable Midi size disposable lids with micron filters, liners and sealing plugs
  • PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
  • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
  • All-in-one solution reduces the chance of outside contamination, along with consistent material transfer which improves quality, while reducing paint consumption
  • PPS™ reduces cleaning solvent consumption by 70%, reduces prep and clean-up time by as much as 50%
  • Sealing plugs are provided for temporary sealing and protection of non-catalyzed paint materials
  • Midi Size refers to a paint mix volume of up to 13.5 fl oz (400mL), ideal for 2-panel repair
  • Improved quality, lower material cost, reduced solvent consumption, improved productivity, less mess and easier to use

3M™ PPS™ Midi Lid & Liner Kit contains 50 lids with micron filters, 50 liners, and 20 sealing plugs for use with the 3M™ Paint Preparation System. A complete painting system that allows the painter to measure, mix, filter, and spray paint materials. PPS™ disposable lids contain a welded-in filter which strains the paint material while spraying.

 

3M™ PPS™ Midi Kit
3M™ PPS™ Midi 16112
3M™ PPS™ Midi Lid & Liner Kit contains 50 disposable Lids with pre-welded micron filters for straining paint, 50 disposable Liners, and 20 sealing plugs for use with the 3M™ Paint Preparation System (PPS™) (PDF, 4.5 Mb). The kit will either contain 125 micron filters which are often recommended for water-borne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference the paint manufacturer to ensure the recommended filter to strain the paint material. The PPS™ Midi Lid & Liner Kit allows technicians to mix graduated measurements of up to 13.5 fluid oz (400 mL) when used with a mix ratio film insert or by weight scale. Mix ratio film inserts sold separately. Midi Size PPS™ is ideal for 2-panel repairs. Use this kit with 3M Midi Size Cup and Collar part number 16122.

Advantages of the 3M™ PPS™ System
Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.
 
3M™ PPS™ Midi Kit contains 50 disposable Lids with pre-welded micron filters for straining paint, 50 disposable Liners, and 20 sealing plugs.
Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun (PDF, 3.7 Mb), which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 15%.

The Bottom Line: Why 3M™ PPS™ is the Paint & Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.

 


Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 44ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English