1. All 3M Products

3M™ PPS™ Lid & Liner Kits

10  Products
  • Designed for use with 3M™ PPS™ (Legacy) paiint preparation system
  • Kits contain disposable lids with micron filters, liners and sealing plugs
  • Stock PPS™ Lids & Liners efficiently and cost-effectively
  • Available for PPS™ Cups & Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs
 More...
Size
Volume
Volume (metric)
Cup Size
10 Products Available
Available options:
 Size, Volume, Volume (metric) and Cup Size
All Options
Close
Specifications
Attribute Name
Value
Brand
PPS™
Container Volume
117 ml, 400 ml, 840 ml, 850 ml, 88.72 ml
Cup Size
Large, Micro, Midi, Mini
Filter Size
125 Micron, 200 Micron
Packaged Form
Boxed
Size
Large, Mini
Volume
13.5 Fluid Ounce, 28 Fluid Ounce, 3 Fluid Ounce, 6 Fluid Ounce
Volume (metric)
180 ml, 400 ml, 850 ml, 90 ml
Details
  • Designed for use with 3M™ PPS™ (Legacy) paiint preparation system
  • Kits contain disposable lids with micron filters, liners and sealing plugs
  • Stock PPS™ Lids & Liners efficiently and cost-effectively
  • Available for PPS™ Cups & Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs
  • PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
  • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
  • Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
  • PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems
  • Sealing plugs allow for temporary sealing and protection of non-catalyzed paint materials

3M™ PPS™ Lid & Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small.

 

PPS Cup & Collar
Lids and liners are sized specifically for the range of 3M™ PPS™ Cups & Collars
Kits for Added Efficiency with 3M™ PPS™
Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid & Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for waterborne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference your paint manufacturer to ensure the recommended filter to strain the material.

Lids and liners are sized specifically for the range of 3M™ PPS™ Cups & Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:
 
3M™ PPS™ UV Standard Lid & Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.

Advantages of the 3M™ PPS™ System
Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.8 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.
 
An all-in-one system for spray coatings
3M™ Accuspray™ ONE spray gun with PPS™
Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.0 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun. which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

The Bottom Line: Why 3M™ PPS™ is the Paint & Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.

Learn More About 3M™ Accuspray™ ONE with PPS™

 

 

 

Customer Reviews
3M™ PPS™ Lid & Liner Kits is rated 2.3 out of 5 by 4.
Rated 3 out of 5 by from Need more collars How do I go about getting just the collars if that's what I need? I have about extra 10 cups because I needed just the collar.
Date published: 2018-07-31
Rated 1 out of 5 by from Not a fan I don't know what it is about the collar but it sure likes to seize on the cup. Doesn't seem to matter how clean it is. Broke several of them so far. I do not have any issues like that with the competitors version.
Date published: 2017-10-06
Rated 3 out of 5 by from Nice Concept I like the concept and design but do have issues with the pressure relief in the bottom of the cup going bad too often and quickly and you can not buy replacements. I also believe it could be made of a better product as they last at maximum 3 months when you use them on a daily basis. They tend to get out of shape and warn which causes you to lose pressure in the cup. All that said it is the best of its kind on the market with less flaws than competitor options.
Date published: 2017-08-18
Rated 2 out of 5 by from The PPS systems is great. The cup not so much After a while they always start to lose their shape and the collar won't screw on anymore. I wish they had a metal cup and collar option.
Date published: 2017-08-06
  • y_2018, m_12, d_11, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_B5000000259|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 2ms
  • REVIEWS, PRODUCT
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English