- Designed for use with 3M™ Paint Preparation System, PPS™
- Kit contains disposable Midi size disposable lids with micron filters, liners and sealing plugs
- PPS™ is an all-in-one disposable solution for mixing/measuring, filtering, spraying and temporary storage of closed coating materials
- System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
- The all-in-one solution reduces chance of outside contamination, delivers consistent material transfer which improves quality while reducing paint consumption
- PPS™ reduces cleaning solvent consumption by 70%
- Sealing plugs are provided for temporary sealing and protection of paint materials
- Large Size refers to a paint mix volume of up to 28 fl oz (850mL), ideal for 4+panel repairs
- System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
- PPS™ available in 30 fl oz, 6 fl oz, 13.5 fl oz, 22 fl oz, and 28 fl oz sizes
3M™ PPS™ Large Lid & Liner Kit contains 25 lids with micron filters, 25 liners, and 10 sealing plugs for use with the 3M™ Paint Preparation System. An all-in-one painting system that allows painters to mix/measure, filter, spray (in any direction!) and temporarily seal and protect coating materials. PPS™ disposable lids contain a welded-in filter which strains the paint material while spraying.
Use with 3M Large Size Cup and Collar
Reduces Material Usage by Eliminating the Need for Traditional Mixing Cups and Paint Strainers
3M™ PPS™ Large Lid & Liner Kit contains 25 disposable Lids with pre-welded micron filters for straining paint, 25 disposable Liners, and 10 sealing plugs for use with the 3M™ Paint Preparation System (PPS™). The kit will either contain 125 micron filters which are often recommended for water-borne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference the paint manufacturer to ensure the recommended filter to strain the paint material. The PPS™ kit allows technicians to mix graduated measurements of up to 28 fluid oz (850 mL) when used with a mix ratio film insert or by weight scale. Mix ratio film inserts sold separately. Large Size PPS™ is ideal for 4+panel repairs. Use this kit with 3M Large Size Cup and Collar part number 16023
Advantages of the 3M™ PPS™ System
Unlike conventional paint cup systems, our 3M™ PPS™
(PDF, 706.9 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.
Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.
Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.
PPS stainless steel metal adaptors allow use with almost any spray gun
A Versatile System that Works with Most Spray Guns
Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun
(PDF, 310.09 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun
(PDF, 3.68 Mb), which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.
Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.
The Bottom Line: Why 3M™ PPS™ is the Paint & Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.