3M™ PELTOR™ X5 Earmuffs X5A/37274(AAD), Over-the-Head, 10 EA/Case

• 31 dB Noise Reduction Rating (NRR)
• Earcup pivot points tilt for optimum comfort and efficiency
• Specially-formulated foam in the earcups
• Replaceable ear cushions and foam liners (hygiene kit HYX5)
• CSA Class AL

3M™ PELTOR™ X5 Earmuffs are designed for very high noise situations, offering a Noise Reduction Rating (NRR) of 31 dB for both headband and hard hat-attached models. The high attenuation provided by these earmuffs is a result of the combination of specially-formulated foam in the earcups and cushions and the innovative spacer and cup design.

The X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X5A earmuffs offer the highest NRR (31 dB) for an earmuff on the market which makes them ideal for very high noise situations. The high attenuation delivered by X5A earmuffs is possible as a result of a combination of advanced technologies including: newly designed spacers, specially formulated earcup liners and innovative foam contained in the cushions. It features an electrically insulated wire headband, often referred to as “dielectric”.

• The wire headband offers consistent pressure over prolonged wearing periods
• Earcup pivot points tilt for optimum comfort and efficiency
• Replaceable ear cushions and foam liners (hygiene kit HYX5)
• Noise Reduction Rating (NRR)b 31 dB. CSA Class AL

NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”.

The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

Hearing Protection Solutions Made Innovatively Easy^™.