1. All 3M Products
  • 3M™ Novec™ 7000 Engineered Fluid
  • 3M™ Novec™ 7000 Engineered Fluid

    Part Number Novec 7000
    • Low Global Warming Potential
    • Excellent dielectric properties
    • Non-ozone depleting
    • Low toxicity
    Typical Properties
    Attribute Name
    Heat Transfer
    Application Category
    Carrier Solvent and Lubricant Deposition, Deposition Solvent, Heat Transfer, Immersion Cooling for Data Centers
    Boiling Point (Celsius)
    34 Degree Celsius
    Boiling Point Range
    0 °C - 49 °C
    Cleaning Strength
    Light Duty
    Aluminium, Brass, Copper, Nylon, PEEK, Polyacetyl, Polyethylene, Polypropylene, PTFE, Stainless Steel
    1.4 g/cm³
    Dielectric Strength Range
    >25 (0.1" gap, kV)
    Fluorocarbon Solubility
    GWP (IPCC 2007)
    420 (100 yr ITH)
    GWP Range
    Hydrocarbon Solubility
    Max Use Temp Range
    <150 Degree C
    Net Weight (Imperial)
    10 lb, 300 lb
    Overall Height (Imperial)
    17 in, 29 in
    Overall Height (Metric)
    43.18 cm, 73.66 cm
    Overall Length (Imperial)
    18.3 in, 9.56 in
    Overall Length (Metric)
    24.29 cm, 46.48 cm
    Overall Width (Imperial)
    18.3 in, 9.56 in
    Plastic Elastomer Compatibility
    Product Series
    Novec 7000
    Purity Grade
    Replacement For
    Volume (Imperial)
    1 gal, 25.68 gal
    Volume (Metric)
    3.79 L, 97.2 L
    • Low Global Warming Potential
    • Excellent dielectric properties
    • Non-ozone depleting
    • Low toxicity
    • Non-flammable
    • Non-corrosive
    • Good thermal stability
    • Useful at extreme low temperatures (to -120 Degree C)
    • Will not damage electronic equipment in event of leakage or other equipment failure

    3M™ Novec™ 7000 Fluid unique properties make it useful as a low temperature, heat transfer fluid for cooling reactors in pharmaceutical & chemical processing. It's also ideal for low temperature automated test equipment & wafer processing equipment.

    Additional Information 3M™ Novec™ 7000 Engineered Fluid is useful as a heat transfer liquid for cooling reactors in the pharmaceutical and chemical processing industries. In the semiconductor industry, it is ideal for automated test equipment (ATE) and wafer processing equipment which requires extreme low temperatures. It has also been used as an autocascade refrigerant. 3M™ Novec™ 7000 Engineered Fluid has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.