1. All 3M Products
  • 3M™ Novec™ 2702 Electronic Grade Coating
  • 3M™ Novec™ 2702 Electronic Grade Coating

    Part Number Novec 2702
    • Low surface tension of the coating solution provides increased surface wetting, especially under low profile components
    • Cross-links with a thermal cure for durable protection
    • Contains no volatile organic compounds (VOCs) and has low global warming potential
    • Can be applied to metals, glass or epoxy laminates
     More...
    Typical Properties
    Attribute Name
    Value
    Application
    Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
    Application Category
    Electronic Coatings
    Application Method
    Solution applied by dipping (preferred), spray, or syringe dispense
    Available Container Sizes
    11 Ib (5.0 kg) 1 Gal Container
    Brand
    Novec™
    Coating Location
    Electronic Device Components
    Coating Thickness (Dip Coated)
    100 nm - 1 µm, (depending on application method)
    Coverage Area
    Depends on the application
    Dielectric Constant
    3.04 (@1kHz, 30%RH)
    Dielectric Strength (V/mil)
    1500 V/mil
    Dissipation Factor
    0.04 (@1kHz, 30% RH)
    Dry Time
    30 - 90 Seconds
    Polymer Type
    Fluorinated Hybrid
    Product Form
    Liquid
    Product Series
    Novec 2702
    Product Type
    Protecting
    Removability
    Permanent
    RoHS 2011/65/EU Compliant
    Yes
    Solids Level
    2 %
    Storage Temperature
    60 °F - 80 °F (16 °C - 27 °C)
    Thermal Cure Time and Temperature
    15 to 60 Minutes @ 70-150 Degree C
    UV Detectable
    No
    Details
    • Low surface tension of the coating solution provides increased surface wetting, especially under low profile components
    • Cross-links with a thermal cure for durable protection
    • Contains no volatile organic compounds (VOCs) and has low global warming potential
    • Can be applied to metals, glass or epoxy laminates
    • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids ie: water, hydrocarbons, silicones, and photoresists

    3M™ Novec™ 2702 Electronic Grade Coating is designed for protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 2 wt% fluorochemical polymer coating carried in a hydrofluoroether solvent. The coating is easy to apply and should be heat cured.

    Additional Information 3M™ Novec™ 2702 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components, it is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical polymer coating carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, permanent film with excellent hydrophobic and oleophobic properties. Easy to apply, the coating should be heat cured to provide added durability and abrasion resistance.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English