- Designed for moisture and corrosion protection of printed circuit boards and electronic components
- Low surface energy allows lubricating oils, silicones, photoresist solutions, etc. to bead and drain freely from coated surfaces
- Helps provide repellency and anti-wetting properties against liquids – water, hydrocarbons, silicones, and photoresists
- Helps protect against corrosive gases and vapors in addition to liquids
View all details
Typical Properties
|
Attribute Name
|
Value
|
|---|---|
|
Application
|
Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
|
|
Application Category
|
Electronic Coatings
|
|
Application Method
|
Solution applied by spray (preferred), dipping, or syringe dispense
|
|
Available Container Sizes
|
11 Ib (5.0 kg) 1 Gal Container
|
|
Brand
|
Novec™
|
|
Can Size
|
1 Liquid Gallon (US), 2 Fluid Ounce (US)
|
|
Coating Location
|
Electronic Device Components
|
|
Coating Thickness (Dip Coated)
|
0.4 - 5.0 µm (depending on application method)
|
|
Coverage Area
|
Depends on the application
|
|
Dielectric Constant
|
2.8 (@1kHz, 30%RH)
|
|
Dielectric Strength (V/mil)
|
3700 V/mil
|
|
Dissipation Factor
|
0.011 (@1kHz, 30% RH)
|
|
Dry Time
|
<2 Minutes
|
|
Height
|
17 in, 5.5 in
|
|
Height (Metric)
|
13.97 Centimeter, 43.18 Centimeter
|
|
Length
|
3.4 in, 9.563 in
|
|
Length (Metric)
|
24.29 Centimeter, 8.636 Centimeter
|
|
Net Weight (Imperial)
|
0.18 lb, 11 lb
|
|
Polymer Type
|
Fluoroacrylate
|
|
Product Form
|
Liquid
|
|
Product Series
|
Novec 1908
|
|
Product Type
|
Protecting
|
|
Removability
|
Removable with 3M™ Novec™ Engineered Fluid 72DA or Novec 7200
|
|
RoHS 2011/65/EU Compliant
|
Yes
|
|
Solids Level
|
8 %
|
|
Storage Temperature
|
60 °F - 80 °F (16 °C - 27 °C)
|
|
Thermal Cure Time and Temperature
|
Dries at room temperature; can be handled in under two minutes
|
|
UV Detectable
|
No
|
|
Width
|
3.3 in, 9.563 in
|
|
Width (Metric)
|
24.29 Centimeter, 8.382 Centimeter
|
Details
- Designed for moisture and corrosion protection of printed circuit boards and electronic components
- Low surface energy allows lubricating oils, silicones, photoresist solutions, etc. to bead and drain freely from coated surfaces
- Helps provide repellency and anti-wetting properties against liquids – water, hydrocarbons, silicones, and photoresists
- Helps protect against corrosive gases and vapors in addition to liquids
- The polymer can endure up to 175°C for 24 hours and maintain repellency
- Essentially insoluble in solvents such as heptanes, toluene & water
- Adheres to a variety of materials (metals, glass, ceramics, polymers, composites, laminates)
- Thermally and electrically stable with good dielectric properties
- Easy to apply – dries quickly without the need for post-application curing
- Designed for spray application, however can also be applied via dip or syringe dispensing methods.
3M™ Novec™ 1908 Electronic Grade Coating is a fluorinated polymer diluted in a blend of 3M™ Novec™ 7100 and 7200 Engineered Fluids, segregated hydrofluoroether solvents, providing a low viscosity, low surface tension coating solution.
Designed for moisture and corrosion protection of printed circuit boards and electronic components, it dries to an ultrathin, transparent coating with excellent hydrophobic and oleophobic properties. It does not need curing and is easy to apply. Novec 1908 coating is non-flammable, non ozone-depleting, low in toxicity, low in GWP, RoHS compliant, and VOC exempt (per U.S. EPA).
Resources
Product Selection Guides
3M United States
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English
United States - English