1. All 3M Products
  • 3M™ Novec™ 1702 Electronic Grade Coating
  • 3M™ Novec™ 1702 Electronic Grade Coating

    Part Number Novec 1702
    • Easy application and processing - dries in seconds without the need for thermal post-curing
    • May require little or no masking
    • Easily removed for rework & repair
    • Contains no volatile organic compounds (VOCs) and has low global warming potential
     More...
    Typical Properties
    Attribute Name
    Value
    Application
    Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
    Application Category
    Electronic Coatings
    Application Method
    Solution applied by dip, brush, spray or syringe dispense
    Available Container Sizes
    0.18 lb (81g) 2 Oz Container, 12 lb (5.4 kg) 1 Gal Container
    Brand
    Novec™
    Coating Location
    Electronic Device Components
    Coating Thickness (Dip Coated)
    < 100 nm (approximate)
    Coverage Area
    Depends on the application
    Dielectric Constant
    3.2 (@1kHz, 30%RH)
    Dielectric Strength (V/mil)
    2000 V/mil
    Dissipation Factor
    0.002 (@1kHz, 30% RH)
    Dry Time
    <2 Minutes
    Net Weight (Imperial)
    12 lb, 2 oz
    Net Weight (Metric)
    5.4 kg, 81 g
    Polymer Type
    Fluoroacrylate
    Product Form
    Liquid
    Product Series
    Novec 1702
    Product Type
    Protecting
    Removability
    Removable with 3M™ Novec™ Engineered Fluid 72DA, 3M™ Novec™ Engineered Fluid 73DE or 3M™ Novec™ Engineered Fluid 7100
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    Yes (including Directive (EU) 2015/863)
    Solids Level
    0.2 %
    Storage Temperature
    60 °F - 80 °F (16 °C - 27 °C)
    Thermal Cure Time and Temperature
    No need to cure, No need to cure, dries at room temperature
    UV Detectable
    No
    Details
    • Easy application and processing - dries in seconds without the need for thermal post-curing
    • May require little or no masking
    • Easily removed for rework & repair
    • Contains no volatile organic compounds (VOCs) and has low global warming potential
    • Is thermally and electrically stable with excellent dielectric properties
    • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

    3M™ Novec™ 1702 Electronic Grade Coating is a lower solids version of Novec™ 1700. It is a clear, low viscosity, low surface tension solution of a 0.2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

    Additional Information 3M™Novec™ 1702 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components, it is a clear, low viscosity, low surface tension solution of a 0.2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.