1. All 3M Products

3M™ Novec™ 1700 Electronic Grade Coating

Part Number Novec 1700
  • Easy application and processing - dries in seconds without the need for thermal post-curing
  • Requires little or no masking
  • Allows solder-through repairability and is easily removed for rework & repair
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
 More...
Typical Properties
Attribute Name
Value
Application
Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
Application Category
Electronic Coatings
Application Method
Solution applied by dipping (preferred), spray, or syringe dispense
Available Container Sizes
12 lb (5.4 kg) 1 Gal Container
Brand
Novec™
Can Size
1 Liquid Gallon (US), 3.5 Liquid Gallon (US), 4 Fluid Ounce (US)
Coating Location
Electronic Device Components
Coating Thickness (Dip Coated)
100 nm - 1 µm, (depending on application method)
Coverage Area
Depends on the application
Dielectric Constant
3.1 (@1kHz, 30%RH)
Dielectric Strength (V/mil)
1000 V/mil
Dissipation Factor
0.0089 (@1kHz, 30% RH)
Dry Time
5 - 30 Seconds
Height
10.25 in, 17 in, 6.6 in
Height (Metric)
16.764 Centimeter, 26.035 Centimeter, 43.18 Centimeter
Length
11.5 in, 4.2 in, 9.563 in
Length (Metric)
10.668 Centimeter, 24.29 Centimeter, 29.21 Centimeter
National Stock Number
8030015193318
Net Weight (Imperial)
12 lb, 40 lb
Polymer Type
Fluoroacrylate
Product Form
Liquid
Product Series
Novec 1700
Product Type
Protecting
Removability
Removable with 3M™ Novec™ Engineered Fluid 72DA or Novec 7100
RoHS 2011/65/EU Compliant
Yes
Solids Level
2 %
Storage Temperature
60 °F - 80 °F (16 °C - 27 °C)
Thermal Cure Time and Temperature
No need to cure
UV Detectable
No
Volume (Metric)
13.2 L, 3.8 L
Width
11.5 in, 4.2 in, 9.563 in
Width (Metric)
10.668 Centimeter, 24.29 Centimeter, 29.21 Centimeter
Details
  • Easy application and processing - dries in seconds without the need for thermal post-curing
  • Requires little or no masking
  • Allows solder-through repairability and is easily removed for rework & repair
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
  • Is thermally and electrically stable with excellent dielectric properties
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

3M™ Novec™ 1700 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

Additional Information 3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English