1. All 3M Products

3M™ Novec™ 1700 Electronic Grade Coating

Part Number Novec 1700
  • Easy application and processing - dries in seconds without the need for thermal post-curing
  • May require little or no masking
  • Easily removed for rework & repair
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
 More...
Typical Properties
Attribute Name
Value
Application
Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
Application Category
Electronic Coatings
Application Method
Solution applied by dip, brush, spray or syringe dispense
Available Container Sizes
0.18 lb (81g) 2 Oz Container, 12 lb (5.4 kg) 1 Gal Container
Brand
Novec™
Coating Location
Electronic Device Components
Coating Thickness (Dip Coated)
0.1 - 0.2 µm (depending on application method)
Coverage Area
Depends on the application
Dielectric Constant
3.2 (@1kHz, 30%RH)
Dielectric Strength (V/mil)
2000 V/mil
Dissipation Factor
0.002 (@1kHz, 30% RH)
Dry Time
<2 Minutes
National Stock Number
8030015193318
Net Weight (Imperial)
0.18 lb, 12 lb
Net Weight (Metric)
5.4 kg, 81 g
Polymer Type
Fluoroacrylate
Product Form
Liquid
Product Series
Novec 1700
Product Type
Electrical Coatings, Protecting
Removability
Removable with 3M™ Novec™ Engineered Fluid 72DA, 3M™ Novec™ Engineered Fluid 73DE or 3M™ Novec™ Engineered Fluid 7100
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
Yes (including Directive (EU) 2015/863)
Solids Level
2 %
Storage Temperature
60 °F - 80 °F (16 °C - 27 °C)
Thermal Cure Time and Temperature
No need to cure, dries at room temperature
UV Detectable
No
Details
  • Easy application and processing - dries in seconds without the need for thermal post-curing
  • May require little or no masking
  • Easily removed for rework & repair
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
  • Is thermally and electrically stable with excellent dielectric properties
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

3M™ Novec™ 1700 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

Additional Information 3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.