1. All 3M Products
  • 3M™ Motor Lead Pigtail or V-Stub Splice 5384, 5-8 kV, Feeder: 250-500 kcmil, Motor Lead: 4/0 AWG-500 kcmil , 1/Case
  • 3M™ Motor Lead Pigtail or V-Stub Splice 5384, 5-8 kV, Feeder: 250-500 kcmil, Motor Lead: 4/0 AWG-500 kcmil , 1/Case

    Part Number 53843M ID 80611425424UPC 00051128559543
    • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
    • Perfect for use with shielded and non-shielded cables
    • Rated for 5/8 kV applications
    • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
     More...
    View Legal Disclaimer
    Specifications
    Attribute Name
    Value
    Application
    Cable Connection
    Brand
    3M™
    Cable Shielding
    Concentric Neutral (CN), Jacketed Concentric Neutral (JCN), Non-shielded, Ribbon Shield, UniShield®, Wire Shield
    Cable Type
    Cable with XLPE insulation
    Conductor Material
    Aluminum, Copper
    Conductor Sizes
    1/0 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 350 kcmil, 4/0 AWG
    Connection Type
    Pigtail (Non-Shielded), Pigtail (Shielded)
    Connector Included
    No, None
    Insulation Outside Diameter
    0.75-1.12 Inch
    Insulation Outside Diameter Range
    0.75-1.12 in
    Insulation Outside Diameter Range (Metric)
    19.1-28.4 mm
    Maximum Operating Voltage
    8 kV
    Maximum Wire Gauge
    185mm²
    Minimum Wire Gauge
    60mm²
    Number of Conductors
    1, 3
    Product Type
    Cold shrinking
    Range Feeder Cable (AWG & kcmil)
    250-500
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    *Important RoHS information
    Splice Type
    Pigtail or V-stub
    Typical Splice Length
    33 in
    Typical Splice Length (Metric)
    838 mm
    Voltage
    5 - 8 kV
    Voltage Application
    Medium Voltage
    Details
    • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
    • Perfect for use with shielded and non-shielded cables
    • Rated for 5/8 kV applications
    • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
    • Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
    • Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)

    3M™ Motor Lead Pigtail Splicing Kits 5380 Series are designed for splicing motor lead cables to incoming feeder cables. These kits are removable and reusable. These kits can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. Mastic is used for the moisture seal on the pigtail kits. The kits utilize a high dielectric constant (K) stress control termination for the feeder cable’s electrical stress control. These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Lug covers • (3) Cold Shrink terminations • (12) Mastic sealing strips • (3) Copper tape strips • (3) Cleaning kits • (6) Tubes of silicone grease • (3) Cold Shrink jacket tubes • (3) Constant force springs • (3) Cable ties • (3) Ground straps • (1) Instruction sheet

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English