1. All 3M Products

3M™ Motor Lead Pigtail Splice Kits 5380 Series

  • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
  • Perfect for use with shielded and non-shielded cables
  • Rated for 5/8 kV applications
  • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
 More...
All Options
Close
Specifications
Attribute Name
Value
Application
Cable Connection
Brand
3M™
Cable Shielding
Concentric Neutral (CN), Jacketed Concentric Neutral (JCN), Non-shielded, Ribbon Shield, UniShield®, Wire Shield
Cable Type
Cable with XLPE insulation, Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
Conductor Material
Aluminum, Copper
Conductor Sizes
1 AWG, 1/0 AWG, 1000 kcmil, 2/0 AWG, 250 kcmil, 3/0 AWG, 350 kcmil, 4/0 AWG, 500 kcmil, 750 kcmil
Connection Type
Pigtail (Non-Shielded), Pigtail (Shielded)
Connector Included
No, None
Inner Diameter of Boot to Size of Cables
0.90 in, 1.16 in, 1.60 in, 2.06 in
Inner Diameter of Boot to Size of Cables (Metric)
22.9 mm, 29.5 mm, 40.6 mm, 52.3 mm
Insulation Outside Diameter
0.30-0.51 Inch, 0.43-0.65 Inch, 0.53-0.88 Inch, 0.75-1.12 Inch
Insulation Outside Diameter Range
0.30-0.51 in, 0.43-0.65 in, 0.53-0.88 in, 0.75-1.12 in
Insulation Outside Diameter Range (Metric)
10.9 - 16.5 mm, 13.5-22.4 mm, 19.1-28.4 mm, 7.6-13.0 mm
Manufacturing Origin
USA
Maximum Bolt Length
1-1/2 in, 1-1/4 in, 3/4 in, 5/8 in
Maximum Bolt Length (Metric)
15.9 mm, 19.1 mm, 31.8 mm, 38.1 mm
Maximum Feeder Lead Size
1/0 AWG, 250 kcmil, 4 AWG, 500 kcmil
Maximum Lug Length
2-1/2 in, 2-3/4 in, 4 in, 5-1/2 in
Maximum Lug Length (Metric)
101.6 mm, 139.7 mm, 63.5 mm, 69.9 mm
Maximum Motor Lead Size
1/0 AWG, 250 kcmil, 4 AWG, 500 kcmil
Maximum Operating Voltage
8 kV
Maximum Wire Gauge
120mm², 185mm², 240mm², 500mm²
Minimum Wire Gauge
120mm², 240mm², 50mm², 60mm²
Number of Conductors
1, 3
Product Type
Cold shrinking, Splice
Range Feeder Cable (AWG & kcmil)
1/0-250, 2-0, 250-500, 8-4
Splice Type
Pigtail or V-stub
Typical Splice Length
30 in, 33 in, 35 in
Typical Splice Length (Metric)
762 mm, 838 mm, 889 mm
Voltage
5 - 8 kV
Voltage Application
Medium Voltage
Details
  • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
  • Perfect for use with shielded and non-shielded cables
  • Rated for 5/8 kV applications
  • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
  • Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
  • Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)

3M™ Motor Lead Pigtail Splicing Kits 5380 Series are designed for splicing motor lead cables to incoming feeder cables. These kits are removable and reusable. These kits can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. Mastic is used for the moisture seal on the pigtail kits. The kits utilize a high dielectric constant (K) stress control termination for the feeder cable’s electrical stress control. These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Lug covers • (3) Cold Shrink terminations • (12) Mastic sealing strips • (3) Copper tape strips • (3) Cleaning kits • (6) Tubes of silicone grease • (3) Cold Shrink jacket tubes • (3) Constant force springs • (3) Cable ties • (3) Ground straps • (1) Instruction sheet