1. 3M United States
  2. All 3M Products

3M™ Motor Lead Pigtail Splice Kits 5316-5319

  • Designed for use with copper compression, 1 or 2 hole lugs
  • Has a durable EPDM rubber construction
 More...
View all details
All Options
Close
Specifications
Attribute Name
Value
Brand
3M™
Connection Type
Pigtail (Non-Shielded)
Insulation Outside Diameter
0.30-0.51 Inch, 0.43-0.65 Inch, 0.53-0.88 Inch, 0.75-1.12 Inch
Insulation Outside Diameter Range
0.30-0.51 in, 0.43-0.65 in, 0.53-0.88 in, 0.75-1.12 in
Insulation Outside Diameter Range (Metric)
10.9 - 16.5 mm, 13.5-22.4 mm, 19.1-28.4 mm, 7.6-13.0 mm
Lug Cover Length
11 in, 13 in, 8 in, 9.5 in
Lug Cover Length (Metric)
20.32 mm, 24.13 mm, 27.94 mm, 33.02 mm
Lug Length
11.0 in, 13.0 in, 8.0 in, 9.5 in
Lug Length (Metric)
20.32 cm, 24.13 cm, 27.94 cm, 33.02 cm
Manufacturing Origin
USA
Maximum Bolt Length
1-1/2 in, 1-1/4 in, 1/2 in, 3/4 in
Maximum Bolt Length (Metric)
12.7 mm, 19.1 mm, 31.8 mm, 38.1 mm
Maximum Feeder Lead Size
1/0 AWG, 250 kcmil, 4 AWG, 500 kcmil
Maximum Motor Lead Size
1/0 AWG, 250 kcmil, 4 AWG, 500 kcmil
Maximum Operating Voltage
8 kV
Range Feeder Cable (AWG & kcmil)
1/0-250, 2-1/0, 250-500, 8-4
Splice Type
Pigtail Only
Units per Case
1
Voltage
5 - 8 kV
Details
  • Designed for use with copper compression, 1 or 2 hole lugs
  • Has a durable EPDM rubber construction

3M™ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.

3M™ 5316-5319 Series Motor Lead Inline Splice Kit contains 3 adapter sleeves, an inline splice cover, a silicone grease tube and an instruction sheet. It is designed for use with copper compression, 1 or 2 hole lugs. Its slip on splice cover has a durable EPDM rubber construction while the mastic strips in the kit seal moisture. After being crimped onto the cables, use this kit to insulate and seal the lugs that are bolted together in an inline configuration. CSA Certified and RoHS 2011/65/EU Compliant‎.