1. 3M United States
  2. All 3M Products

3M™ Motor Lead Inline Pigtail Splice 5313, 1 kV, 1/0 AWG-250 kcmil (feeder), AWG-500 kcmil (motor lead), 1/case

Part Number 53133M ID 80610123327UPC 00054007122692
  • Designed for use with copper compression, 1 or 2 hole lugs
  • Has a durable EPDM rubber construction
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Connection Type
Inline
Insulation Outside Diameter by Conductor Size
2–1/0 AWG (0.40–0.54 Inch), 1/0 AWG-250 kcmil (0.52-0.80 Inch)
Insulation Outside Diameter by Conductor Size (Metric)
2–1/0 AWG (10.2-13.7 mm), 1/0 AWG-250 kcmil (13.2-20.3 mm)
Insulation Outside Diameter Range
2-1/0 AWG: 0.40-0.54 in / 1/0 AWG-250 kcmil: 0.52-0.80 in
Insulation Outside Diameter Range (Metric)
2-1/0 AWG: 10.2-13.7 mm / 1/0 AWG-250 kcmil: 13.2-20.3 mm
Manufacturing Origin
USA
Maximum Bolt Length
3/4 in
Maximum Bolt Length (Metric)
19.1 mm
Maximum Feeder Lead Size
250 kcmil
Maximum Motor Lead Size
250 kcmil
Maximum Operating Voltage
1 kV
Range Feeder Cable (AWG & kcmil)
1/0-250
Splice Cover Inner Diameter
2-1/0 AWG: 0.50 in / 1/0 AWG-250 kcmil: 0.42 in
Splice Cover Inner Diameter (Metric)
2-1/0 AWG: 12.7 mm / 1/0 AWG-250 kcmil: 10.7 mm
Splice Cover Length
9-10 in
Splice Cover Length (Metric)
228.6-254.0 mm
Splice Type
Inline
Units per Case
1
Voltage
1 kV and less
Details
  • Designed for use with copper compression, 1 or 2 hole lugs
  • Has a durable EPDM rubber construction

3M™ Motor Lead Inline Splicing Kits 5311-5314 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.

3M™ 5300 Series Motor Lead Inline Splice Kit contains 3 adapter sleeves, an inline splice cover, a silicone grease tube and an instruction sheet. It is designed for use with copper compression, 1 or 2 hole lugs. Its slip on splice cover has durable EPDM rubber construction while the mastic strips in the kit seal moisture. After being crimped onto the cables, use this kit to insulate and seal the lugs that are bolted together in an inline configuration. CSA Certified and RoHS 2011/65/EU Compliant‎.

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.