1. All 3M Products
  • 3M™ Motor Lead Inline Splice 5333, 5-8 kV, 1/0 AWG-250 kcmil (feeder), 2 AWG-250 kcmil (motor lead), 1/Case
  • 3M™ Motor Lead Inline Splice 5333, 5-8 kV, 1/0 AWG-250 kcmil (feeder), 2 AWG-250 kcmil (motor lead), 1/Case

    Part Number 53333M ID 80610735245UPC 00054007122777
    • Features shielded, non-shielded cables
    • Designed for splicing motor lead cables to the incoming feeder cables
    • Suitable for use with 30000 Series copper compression lugs or other UL Listed copper lugs
    • 0.3 to 0.51-in O.D. insulation
     More...
    View Legal Disclaimer
    Specifications
    Attribute Name
    Value
    Brand
    3M™
    Connection Type
    Pigtail (Non-Shielded), Pigtail (Shielded)
    Insulation Outside Diameter by Conductor Size
    2-2/0 AWG (0.53-0.71 Inch), 3/0 AWG-250 kcmil (0.70-0.88 Inch)
    Insulation Outside Diameter by Conductor Size (Metric)
    2-2/0 AWG (13.5-18.0 mm), 3/0 AWG-250 kcmil (17.8-22.4 mm)
    Insulation Outside Diameter Range
    2-2/0 AWG: 0.53-0.71 in / 3/0 AWG-250 kcmil: 0.70-0.88 in
    Insulation Outside Diameter Range (Metric)
    2-2/0 AWG: 13.5-18.0 mm / 3/0 AWG-250 kcmil: 17.8-22.4 mm
    Maximum Operating Voltage
    8 kV
    Range Feeder Cable (AWG & kcmil)
    1/0-250
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    *Important RoHS information
    Splice Type
    Inline
    Voltage
    5 - 8 kV
    Details
    • Features shielded, non-shielded cables
    • Designed for splicing motor lead cables to the incoming feeder cables
    • Suitable for use with 30000 Series copper compression lugs or other UL Listed copper lugs
    • 0.3 to 0.51-in O.D. insulation
    • Accommodates wire size of 10 to 4 AWG
    • Rated for 5/8 kV applications
    • Includes 3 rolls Scotch® stress-control tape 2220, 12 adapters, 3 instruction sheets and more
    • Withstands temperatures of 194 degrees F (90 degrees C)

    3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits. These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ 30000 Series copper compression lugs, or other UL listed copper lugs, can be used. In addition, 3M™ Motor Lead Splicing Kits 5331-5334 require vinyl tape which can also be purchased separately. For inline splice kits: The longitudinal space required for assembly will be approximately 2 (splice cover length), to allow space for the splice while the connection is being made. Kit contents include: • (3) Cold Shrink tubes • (12) Adapters • (3) Rolls Scotch® Stress Control Tape 2220 • (3) Bags of solvent cleaning cloths • (6) Tubes of silicone grease • (3) Rolls Scotch® Linerless Rubber Splicing Tape 130C • (3) Instruction sheets

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English